[PULL] Please pull qcom-fixes-2025.04-rc4

Caleb Connolly caleb.connolly at linaro.org
Wed Feb 26 15:34:46 CET 2025


Hi Tom,

Sorry this is a bit later than expected.

The clk_stub, regulator, and pinctrl fixes enable the sdcard on the RB5 dev
board (and sm8250 devices broadly). clk_stub is only enabled in qcom_defconfig
and the others are qcom specific so these shouldn't affect other platforms.

Lastly, a small ufetch fix from Sam which gets color rendering correctly on
U-Boots framebuffer video device.

Kind regards,
Caleb

The following changes since commit dc0ee458f1afae4cb5c8a7b2c875bb24ffdf71ca:

  Prepare v2025.04-rc3 (2025-02-24 16:53:59 -0600)

are available in the Git repository at:

  git at source.denx.de:u-boot/custodians/u-boot-snapdragon.git tags/qcom-fixes-2025.04-rc4

for you to fetch changes up to 6267ce556595e0586aee3a7d63042d105dc3fa4e:

  cmd: ufetch: use 3-bit colour ANSI codes (2025-02-26 13:48:27 +0000)

----------------------------------------------------------------
Caleb Connolly (4):
      clk: add stub clock driver
      qcom_defconfig: enable stub clock
      power: regulator: add additional supported LDOs for pm8150l
      pinctrl: qcom: sm8250: fix pin count

Julius Lehmann (1):
      clk: stub: add sm8150 compatible id

Sam Day (1):
      cmd: ufetch: use 3-bit colour ANSI codes

 cmd/ufetch.c                                  |  4 +-
 configs/qcom_defconfig                        |  1 +
 drivers/clk/Kconfig                           |  7 +++
 drivers/clk/Makefile                          |  1 +
 drivers/clk/clk-stub.c                        | 67 +++++++++++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-sm8250.c         |  2 +-
 drivers/power/regulator/qcom-rpmh-regulator.c |  7 +++
 7 files changed, 86 insertions(+), 3 deletions(-)
 create mode 100644 drivers/clk/clk-stub.c


More information about the U-Boot mailing list