[resend v3 17/19] drivers: mtd: nand: Enabled Kconfig and Makefile for SPL_NAND_FRAMEWORK

[dinesh.maniyam at intel.com]

From: Dinesh Maniyam <dinesh.maniyam at intel.com>

Enable the Kconfig and Makefile for the SPL_NAND_FRAMEWORK
support in agilex5 family device. This will include all the basic
files needed to use the existing nand spl support.

Signed-off-by: Dinesh Maniyam <dinesh.maniyam at intel.com>
---
 drivers/mtd/nand/raw/Kconfig  |  7 +++++++
 drivers/mtd/nand/raw/Makefile | 10 ++++++++++
 2 files changed, 17 insertions(+)

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index a9515c7b74..d6ac730224 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -837,4 +837,11 @@ config SYS_NAND_HW_ECC_OOBFIRST
 
 endif	# if SPL
 
+config SPL_NAND_FRAMEWORK
+	bool "Compile the entire NAND framework into the SPL"
+	help
+	  Some drivers require a lot of functionality from the NAND framework
+	  core when used in SPL. This option allows compiling the full NAND
+	  framework into the SPL instead of it's reduced version.
+
 endif	# if MTD_RAW_NAND
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 58fde3272f..0a32e184dc 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -3,8 +3,18 @@
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
+nand-framework-objs := nand.o nand_bbt.o nand_ids.o nand_util.o \
+		       nand_ecc.o nand_base.o nand_timings.o nand_amd.o \
+		       nand_hynix.o nand_macronix.o nand_micron.o \
+		       nand_samsung.o nand_toshiba.o
+
 ifdef CONFIG_SPL_BUILD
 
+ifdef CONFIG_SPL_NAND_FRAMEWORK
+obj-y += $(nand-framework-objs)
+NORMAL_DRIVERS=y
+endif
+
 ifdef CONFIG_SPL_NAND_DRIVERS
 NORMAL_DRIVERS=y
 endif
-- 
2.19.0