[PULL] Please pull qcom-fixes-2025.04-rc4

Tom Rini trini at konsulko.com
Wed Feb 26 19:11:44 CET 2025


On Wed, Feb 26, 2025 at 02:49:07PM +0000, Caleb Connolly wrote:
> 
> 
> On 2/26/25 14:34, Caleb Connolly wrote:
> > Hi Tom,
> > 
> > Sorry this is a bit later than expected.
> > 
> > The clk_stub, regulator, and pinctrl fixes enable the sdcard on the RB5 dev
> > board (and sm8250 devices broadly). clk_stub is only enabled in qcom_defconfig
> > and the others are qcom specific so these shouldn't affect other platforms.
> > 
> > Lastly, a small ufetch fix from Sam which gets color rendering correctly on
> > U-Boots framebuffer video device.
> > 
> > Kind regards,
> > Caleb
> > 
> > The following changes since commit dc0ee458f1afae4cb5c8a7b2c875bb24ffdf71ca:
> > 
> >    Prepare v2025.04-rc3 (2025-02-24 16:53:59 -0600)
> > 
> > are available in the Git repository at:
> > 
> >    git at source.denx.de:u-boot/custodians/u-boot-snapdragon.git tags/qcom-fixes-2025.04-rc4

Note that if you have something like this in your .git/config:
[remote "origin"]
	fetch = +refs/heads/*:refs/remotes/origin/*
	b4-treename = "u-boot"
	url = https://source.denx.de/u-boot/custodians/u-boot-snapdragon.git
	pushurl = git at source.denx.de:u-boot/custodians/u-boot-snapdragon.git

I can grab this with b4 pr (which now helpfully returns an error about
the protocol being unsupported, yay).

> The actual CI run is at
> https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/24841
> 
> Made the mistake of having a branch and tag with the same name.
> > 
> > for you to fetch changes up to 6267ce556595e0586aee3a7d63042d105dc3fa4e:
> > 
> >    cmd: ufetch: use 3-bit colour ANSI codes (2025-02-26 13:48:27 +0000)
> > 
> > ----------------------------------------------------------------
> > Caleb Connolly (4):
> >        clk: add stub clock driver
> >        qcom_defconfig: enable stub clock
> >        power: regulator: add additional supported LDOs for pm8150l
> >        pinctrl: qcom: sm8250: fix pin count
> > 
> > Julius Lehmann (1):
> >        clk: stub: add sm8150 compatible id
> > 
> > Sam Day (1):
> >        cmd: ufetch: use 3-bit colour ANSI codes
> > 
> >   cmd/ufetch.c                                  |  4 +-
> >   configs/qcom_defconfig                        |  1 +
> >   drivers/clk/Kconfig                           |  7 +++
> >   drivers/clk/Makefile                          |  1 +
> >   drivers/clk/clk-stub.c                        | 67 +++++++++++++++++++++++++++
> >   drivers/pinctrl/qcom/pinctrl-sm8250.c         |  2 +-
> >   drivers/power/regulator/qcom-rpmh-regulator.c |  7 +++
> >   7 files changed, 86 insertions(+), 3 deletions(-)
> >   create mode 100644 drivers/clk/clk-stub.c

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20250226/1cd8f724/attachment.sig>


More information about the U-Boot mailing list