[PATCH v2 13/15] mach-snapdragon: Support booting as a coreboot payload

[Stephen Boyd]

Coreboot sets up the DRAM, CPU, and devices before booting a payload,
meaning we can parse the coreboot tables at boot for memory info when
running as a payload. Use the memory descriptors from coreboot if the
tables are present so that Snapdragon SoCs can run U-boot as a coreboot
payload.

Signed-off-by: Stephen Boyd <swboyd at chromium.org>
---
 arch/arm/mach-snapdragon/board.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/mach-snapdragon/board.c b/arch/arm/mach-snapdragon/board.c
index 2ef936aab757..cb3df1c2adec 100644
--- a/arch/arm/mach-snapdragon/board.c
+++ b/arch/arm/mach-snapdragon/board.c
@@ -14,6 +14,7 @@
 #include <asm/io.h>
 #include <asm/psci.h>
 #include <asm/system.h>
+#include <cb_sysinfo.h>
 #include <dm/device.h>
 #include <dm/pinctrl.h>
 #include <dm/uclass-internal.h>
@@ -48,6 +49,10 @@ static struct {
 
 int dram_init(void)
 {
+#ifdef CONFIG_SYS_COREBOOT
+	if (gd->arch.coreboot_table)
+		return coreboot_dram_init();
+#endif
 	/*
 	 * gd->ram_base / ram_size have been setup already
 	 * in qcom_parse_memory().
@@ -81,8 +86,21 @@ static void qcom_configure_bi_dram(void)
 	}
 }
 
+phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
+{
+#ifdef CONFIG_SYS_COREBOOT
+	if (gd->arch.coreboot_table)
+		return coreboot_board_get_usable_ram_top(total_size);
+#endif
+	return gd->ram_top;
+}
+
 int dram_init_banksize(void)
 {
+#ifdef CONFIG_SYS_COREBOOT
+	if (gd->arch.coreboot_table)
+		return coreboot_dram_init_banksize();
+#endif
 	qcom_configure_bi_dram();
 
 	return 0;
-- 
Sent by a computer, using git, on the internet