[PATCH 1/2] sunxi: mmc: Fix T113-s3 MMC clock divider

[Tom Rini]

On Thu, Feb 27, 2025 at 12:31:59AM +0000, Peng Fan wrote:
> Hi Andre,
> 
> > Subject: [PATCH 1/2] sunxi: mmc: Fix T113-s3 MMC clock divider
> > 
> > On the Allwinner D1/R528/T113-s3 SoCs the MMC clock source
> > selected by mux value 1 is PLL_PERIPH0(1x), not (2x), as in the other
> > SoCs.
> > But we have still the hidden divisor of 2 in the MMC mod clock, so
> > need to explicitly compensate for that on those SoCs.
> > 
> > This leads to the actually programmed clock rate to be double
> > compared to before, which increases the MMC performance on those
> > SoCs.
> > 
> > Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> > Reported-by: Kuba Szczodrzyński <kuba at szczodrzynski.pl>
> > ---
> >  drivers/mmc/sunxi_mmc.c | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
> > index 0b56d1405be..8f72d758e46 100644
> > --- a/drivers/mmc/sunxi_mmc.c
> > +++ b/drivers/mmc/sunxi_mmc.c
> > @@ -92,6 +92,13 @@ static int mmc_set_mod_clk(struct
> > sunxi_mmc_priv *priv, unsigned int hz)
> >  		pll = CCM_MMC_CTRL_PLL6;
> >  		pll_hz = clock_get_pll6();
> >  #endif
> > +		/*
> > +		 * On the D1/R528/T113 mux source 1 refers to
> > PLL_PERIPH0(1x),
> > +		 * like for the older SoCs. However we still have the
> > hidden
> > +		 * divider of 2x, so compensate for that here.
> > +		 */
> > +		if (IS_ENABLED(CONFIG_MACH_SUN8I_R528))
> 
> Use CONFIG_IS_ENABLED(MACH_SUN8I_R528)?

No, either is fine, IS_ENABLED(CONFIG_FOO) is less confusing for the
case where there's never a CONFIG_xPL_FOO.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20250226/2c991700/attachment.sig>