[PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot

[Fabio Estevam]

On Wed, Feb 26, 2025 at 11:27 PM Tom Rini <trini at konsulko.com> wrote:

> Did you reset the environment at some point to be the new default?

Yes, this was the issue, thanks.

Besides that, I also need to set kernel_addr_r for the boot to succeed:

--- a/board/freescale/imx93_evk/imx93_evk.env
+++ b/board/freescale/imx93_evk/imx93_evk.env
@@ -16,6 +16,7 @@ mmcroot=/dev/mmcblk1p2 rootwait rw
 mmcautodetect=yes
 mmcargs=setenv bootargs ${jh_clk} ${mcore_clk} console=${console}
root=${mmcroot}
 prepare_mcore=setenv mcore_clk clk-imx93.mcore_booted
+kernel_addr_r=CONFIG_SYS_LOAD_ADDR
 loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
 loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
 loadcntr=fatload mmc ${mmcdev}:${mmcpart} ${cntr_addr} ${cntr_file}

Tomorrow, I will send a formal patch that sets kernel_addr_r for all
the i.MX EVK boards that have been converted to bootstd.

Thanks for your help