[PATCH] arm: mvebu: Fix typos in Kconfig help text

Stefan Roese sr at denx.de
Thu Feb 27 10:25:56 CET 2025


On 27.02.25 00:07, Chris Packham wrote:
> Fix a couple of typos in mach-mvebu/Kconfig.
> 
> Signed-off-by: Chris Packham <judge.packham at gmail.com>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
> 
>   arch/arm/mach-mvebu/Kconfig | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index adb816982f87..22180b011559 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -260,7 +260,7 @@ config DDR_LOG_LEVEL
>   	  failure, RL, WL errors and other algorithm failure.  At level 1,
>   	  provides the D-Unit setup (SPD/Static configuration).  At level 2,
>   	  provides the windows margin as a results of DQS centeralization.
> -	  At level 3, rovides the windows margin of each DQ as a results of
> +	  At level 3, provides the windows margin of each DQ as a results of
>   	  DQS centeralization.
>   
>   config DDR_IMMUTABLE_DEBUG_SETTINGS
> @@ -450,7 +450,7 @@ config MVEBU_EFUSE_VHV_GPIO
>   	string "VHV_Enable GPIO name for eFuse programming"
>   	depends on MVEBU_EFUSE && !ARMADA_3700
>   	help
> -	  The eFuse programing (burning) phase requires supplying 1.8V to the
> +	  The eFuse programming (burning) phase requires supplying 1.8V to the
>   	  device on the VHV power pin, while for normal operation the VHV power
>   	  rail must be left unconnected. See Marvell AN-389: ARMADA VHV Power
>   	  document (Doc. No. MV-S302545-00 Rev. C, August 2, 2016) for details.

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de



More information about the U-Boot mailing list