[PATCH 08/10] board: adi: Add support for SC598

[Artamonovs, Arturs]

SPL config is for SPL
The falcon mode config is not in this patch series

> -----Original Message-----
> From: Philip Molloy <philip at philipmolloy.com>
> Sent: Wednesday, July 9, 2025 10:24 AM
> To: Greg Malysa <malysagreg at gmail.com>; u-boot at lists.denx.de
> Cc: Linux Factory <adsp-linux at analog.com>; Bimpikas, Vasileios
> <Vasileios.Bimpikas at analog.com>; Agarwal, Utsav
> <Utsav.Agarwal at analog.com>; Artamonovs, Arturs
> <Arturs.Artamonovs at analog.com>; Nathan Barrett-Morrison
> <nathan.morrison at timesys.com>; Ian Roberts <ian.roberts at timesys.com>;
> Oliver Gaskell <Oliver.Gaskell at analog.com>; Tom Rini <trini at konsulko.com>;
> Trevor Woerner <twoerner at gmail.com>
> Subject: Re: [PATCH 08/10] board: adi: Add support for SC598
> 
> [External]
> 
> On Mon, 2025-06-02 at 15:44 -0400, Greg Malysa wrote:
> > > This adds support for the Analog Devices SC598-SOM and configurations
> > > for using it with both the SOMCRR-EZKIT and SOMCRR-EZLITE.
> > >
> > > Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas at analog.com>
> > > Signed-off-by: Utsav Agarwal <utsav.agarwal at analog.com>
> > > Signed-off-by: Arturs Artamonovs <arturs.artamonovs at analog.com>
> > > Signed-off-by: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
> > > Signed-off-by: Greg Malysa <malysagreg at gmail.com>
> > > ---
> > >
> > >  arch/arm/dts/sc598-som-ezkit.dts              | 166 ++++++++++++
> > >  arch/arm/dts/sc598-som-ezlite.dts             |  82 ++++++
> > >  arch/arm/dts/sc598-som.dtsi                   | 237
> > > +++++++++++++++++-
> > >  arch/arm/dts/sc59x.dtsi                       | 183 ++++++++++++++
> > >  arch/arm/dts/sc5xx.dtsi                       | 137 +++++++++-
> > >  board/adi/common-sc598-som/sc598-som.c        |  34 +++
> > >  board/adi/sc598-som-ezkit/Makefile            |   8 +
> > >  board/adi/sc598-som-ezkit/sc598-som-ezkit.env |  18 +-
> > >  board/adi/sc598-som-ezlite/Makefile           |   8 +
> > >  .../adi/sc598-som-ezlite/sc598-som-ezlite.env |  12 +-
> > >  configs/sc598-som-ezkit-spl_defconfig         | 123 +++++++++
> > >  configs/sc598-som-ezlite-spl_defconfig        | 123 +++++++++
> 
> I assume `-spl` was added to the defconfig name to distinguish it from the
> defconfig enabling falcon mode? Seems like it makes sense to remove it for
> mainline.