[PATCH v3] rockchip: px30/rk3326: Implement checkboard() to print SoC variant
Jonas Karlman
jonas at kwiboo.se
Mon Jul 14 01:32:12 CEST 2025
On 6/10/2025 11:42 AM, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz at cherry.de>
>
> This implements checkboard() to print the current SoC model used by a
> board, e.g. one of:
>
> SoC: PX30
> SoC: PX30S
> SoC: PX30K
> SoC: RK3326
> SoC: RK3326S
>
> when U-Boot proper is running.
>
> The information is read from the OTP and also the DDR_GRF. There's no
> public information as far as I know about the layout and stored
> information on OTP but this was provided by Rockchip themselves through
> their support channel.
>
> The OTP stores the information of whether the SoC is PX30K or something
> else. To differentiate between PX30/RK3326 and PX30S/RK3326S, one needs
> to read some undocumented bitfield in a DDR_GRF register as done in
> vendor kernel,
> c.f. https://github.com/armbian/linux-rockchip/blob/rk-6.1-rkr5.1/drivers/soc/rockchip/rockchip-cpuinfo.c#L118-L133
>
> I do not own a PX30S, nor RK3326/RK3326S so cannot test it works
> properly.
>
> Also add the OTP node to the pre-relocation phase of U-Boot proper so
> that the SoC variant can be printed when DISPLAY_BOARDINFO is enabled.
> This is not required if DISPLAY_BOARDINFO_LATE is enabled because this
> happens after relocation. If both are enabled, then the SoC variant will
> be printed twice in the boot log, e.g.:
>
> U-Boot 2025.07-rc3-00014-g7cb731574ae6-dirty (May 28 2025 - 13:52:47 +0200)
>
> Model: Theobroma Systems PX30-uQ7 SoM on Haikou devkit
> SoC: PX30 <---- due to DISPLAY_BOARDINFO
> DRAM: 2 GiB
> PMIC: RK809 (on=0x40, off=0x00)
> Core: 293 devices, 27 uclasses, devicetree: separate
> MMC: mmc at ff370000: 1, mmc at ff390000: 0
> Loading Environment from MMC... Reading from MMC(1)... OK
>
> In: serial at ff030000
> Out: serial at ff030000
> Err: serial at ff030000
> Model: Theobroma Systems PX30-uQ7 SoM on Haikou devkit
> SoC: PX30 <----- due to DISPLAY_BOARDINFO_LATE
> Net: eth0: ethernet at ff360000
>
> Signed-off-by: Quentin Schulz <quentin.schulz at cherry.de>
I have now tested this on my RK3326 ODROID-GO Super:
U-Boot 2025.07 (Jul 13 2025 - 10:07:16 +0000)
Model: ODROID-GO Super
SoC: RK3326
DRAM: 1 GiB (total 1022 MiB)
so this is,
Reviewed-by: Jonas Karlman <jonas at kwiboo.se>
Regards,
Jonas
> ---
> Tested on a PX30 Ringneck and PX30K Ringneck. Would be nice if anyone
> had a device with a PX30S, RK3326 or RK3326S so we could verify it
> prints what it should :)
> ---
> Changes in v3:
> - added (theoretical, untested) support for RK3326/RK3326S based on
> feedback from Jonas,
> - Link to v2: https://lore.kernel.org/r/20250606-px30-identify-variant-v2-1-624d34ccc381@cherry.de
>
> Changes in v2:
> - added (theoretical, untested) support for PX30S based on feedback from
> Kever,
> - Link to v1: https://lore.kernel.org/r/20250528-px30-identify-variant-v1-1-4ea69c527a0d@cherry.de
> ---
> arch/arm/dts/px30-u-boot.dtsi | 4 +++
> arch/arm/mach-rockchip/px30/px30.c | 61 ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 65 insertions(+)
[snip]
More information about the U-Boot
mailing list