[PATCH v5 1/8] configs: run savedefconfig on qcom_ipq5424_mmc_defconfig

[Casey Connolly]

Regenerate this defconfig since it seems to have been hand-made
originally. Some options like SCSI were enabled in the defconfig but not
in the final config, it seems like disabling SCSI is the correct thing
here, so no functional changes.

Signed-off-by: Casey Connolly <casey.connolly at linaro.org>
---
 configs/qcom_ipq5424_mmc_defconfig | 67 ++++++++++++--------------------------
 1 file changed, 21 insertions(+), 46 deletions(-)

diff --git a/configs/qcom_ipq5424_mmc_defconfig b/configs/qcom_ipq5424_mmc_defconfig
index 0dd46680b0fc80b10a6975aaddf36e97d8b9be84..81c3865193d73e3f1fc85bd342e3f1d25534c81d 100644
--- a/configs/qcom_ipq5424_mmc_defconfig
+++ b/configs/qcom_ipq5424_mmc_defconfig
@@ -2,82 +2,57 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_POSITION_INDEPENDENT=y
 CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864
 CONFIG_ARCH_SNAPDRAGON=y
+CONFIG_TEXT_BASE=0x8a380000
 CONFIG_NR_DRAM_BANKS=24
+CONFIG_ENV_SIZE=0x40000
+CONFIG_ENV_OFFSET=0
 CONFIG_DEFAULT_DEVICE_TREE="qcom/ipq5424-rdp466"
 CONFIG_SYS_LOAD_ADDR=0x50000000
+CONFIG_DEBUG_UART_BASE=0x1a84000
+CONFIG_DEBUG_UART_CLOCK=14745600
+CONFIG_DEBUG_UART=y
+CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-# CONFIG_EFI_LOADER is not set
-# CONFIG_EFI_BINARY_EXEC is not set
-# CONFIG_EFI_VARIABLE_FILE_STORE is not set
-# CONFIG_PXE_UTILS is not set
 # CONFIG_BOOTSTD is not set
-# CONFIG_BOOTMETH_VBE is not set
-CONFIG_BOOTDELAY=2
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_PREBOOT=y
-CONFIG_LOG_MAX_LEVEL=9
-CONFIG_LOG_DEFAULT_LEVEL=4
+CONFIG_SYS_PBSIZE=1024
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
 CONFIG_CMD_PART=y
+CONFIG_EFI_PARTITION=y
 CONFIG_OF_LIVE=y
+CONFIG_ENV_IS_IN_MMC=y
 CONFIG_USE_DEFAULT_ENV_FILE=y
 CONFIG_DEFAULT_ENV_FILE="board/qualcomm/default.env"
 CONFIG_CLK=y
 CONFIG_CLK_QCOM_IPQ5424=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_SCSI=y
-CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000
 CONFIG_MSM_GPIO=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_QCOM_IPQ5424=y
+# CONFIG_I2C is not set
+# CONFIG_INPUT is not set
+CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_MSM=y
-CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_MTD=y
 CONFIG_DM_MDIO=y
 CONFIG_DM_ETH_PHY=y
 CONFIG_DWC_ETH_QOS=y
 CONFIG_DWC_ETH_QOS_QCOM=y
 CONFIG_RGMII=y
 CONFIG_PHY=y
 CONFIG_PHY_QCOM_QMP_UFS=y
 CONFIG_PHY_QCOM_QUSB2=y
-CONFIG_SCSI=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_QCOM_IPQ5424=y
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_MSM_SERIAL=y
 CONFIG_MSM_GENI_SERIAL=y
 CONFIG_SOC_QCOM=y
-CONFIG_DEBUG_UART=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_DEBUG_UART_BASE=0x1a84000
-CONFIG_DEBUG_UART_MSM_GENI=y
-CONFIG_DEBUG_UART_CLOCK=14745600
-CONFIG_TEXT_BASE=0x8a380000
-CONFIG_REMAKE_ELF=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_BOOTSTD_FULL=y
-CONFIG_SYS_CBSIZE=1024
-CONFIG_SYS_PBSIZE=1024
-CONFIG_OF_LIVE=y
-CONFIG_MSM_SERIAL=y
-CONFIG_DM_EVENT=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_OFFSET=0
-CONFIG_PARTITIONS=y
-CONFIG_PARTITION_UUIDS=y
-CONFIG_MTD=y
-CONFIG_MTD_PARTS=y
-CONFIG_HUSH_PARSER=y
-CONFIG_PARTITIONS=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_I2C is not set
-# CONFIG_INPUT is not set
-# CONFIG_SCSI is not set
-# CONFIG_SPMI is not set

-- 
2.50.0