[PATCH 3/6] arm: ls1021a-pg-wcom: add i2c mux node and eeprom

[Holger Brunck]

We are now using the DM code for the i2c mux and to read out the
inventory eeprom. Therefore we need to add the nodes to the specific DTS
files.

Signed-off-by: Holger Brunck <holger.brunck at hitachienergy.com>
---
 arch/arm/dts/ls1021a-pg-wcom-expu1.dts | 20 ++++++++++++++++++++
 arch/arm/dts/ls1021a-pg-wcom-seli8.dts | 20 ++++++++++++++++++++
 2 files changed, 40 insertions(+)

diff --git a/arch/arm/dts/ls1021a-pg-wcom-expu1.dts b/arch/arm/dts/ls1021a-pg-wcom-expu1.dts
index ec8e7dee271..1068f1a288a 100644
--- a/arch/arm/dts/ls1021a-pg-wcom-expu1.dts
+++ b/arch/arm/dts/ls1021a-pg-wcom-expu1.dts
@@ -51,6 +51,26 @@
 
 &i2c0 {
 	status = "okay";
+
+	pca9547 at 70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c at 1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ivm at 50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+				label = "MAIN_CTRL";
+			};
+		};
+	};
 };
 
 &dspi1 {
diff --git a/arch/arm/dts/ls1021a-pg-wcom-seli8.dts b/arch/arm/dts/ls1021a-pg-wcom-seli8.dts
index 03ce3ab4e47..3e8c54d83c9 100644
--- a/arch/arm/dts/ls1021a-pg-wcom-seli8.dts
+++ b/arch/arm/dts/ls1021a-pg-wcom-seli8.dts
@@ -44,6 +44,26 @@
 
 &i2c0 {
 	status = "okay";
+
+	pca9547 at 70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c at 1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ivm at 50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+				label = "MAIN_CTRL";
+			};
+		};
+	};
 };
 
 &ifc {
-- 
2.49.0