[PATCH] clk: stm32: Wrong macros used in register read

[Andrew Goodbody]

Smatch reported a warning about a shift macro being used as a mask. Make
the obvious changes to make this register read calculation work the same
as the previous ones.

Signed-off-by: Andrew Goodbody <andrew.goodbody at linaro.org>
---
This fix is somewhat speculative as it is being made without
reference to any manual.
---
 drivers/clk/stm32/clk-stm32h7.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/stm32/clk-stm32h7.c b/drivers/clk/stm32/clk-stm32h7.c
index aa3be414a29..df82db69738 100644
--- a/drivers/clk/stm32/clk-stm32h7.c
+++ b/drivers/clk/stm32/clk-stm32h7.c
@@ -549,8 +549,8 @@ static u32 stm32_get_PLL1_rate(struct stm32_rcc_regs *regs,
 	divr1 = readl(&regs->pll1divr) & RCC_PLL1DIVR_DIVR1_MASK;
 	divr1 = (divr1 >> RCC_PLL1DIVR_DIVR1_SHIFT) + 1;
 
-	fracn1 = readl(&regs->pll1fracr) & RCC_PLL1DIVR_DIVR1_MASK;
-	fracn1 = fracn1 & RCC_PLL1DIVR_DIVR1_SHIFT;
+	fracn1 = readl(&regs->pll1fracr) & RCC_PLL1FRACR_FRACN1_MASK;
+	fracn1 = (fracn1 >> RCC_PLL1FRACR_FRACN1_SHIFT) + 1;
 
 	vco = (pllsrc / divm1) * divn1;
 	rate = (pllsrc * fracn1) / (divm1 * 8192);

---
base-commit: 3532f1f5edfc97c9dcea723cdeb732eda44bc669
change-id: 20250724-clk_stm32-b097d32f3fe9

Best regards,
-- 
Andrew Goodbody <andrew.goodbody at linaro.org>