[PATCH 4/6] sunxi: pinecube: Enable EMAC and network support

[Paul Kocialkowski]

The pinecube has an ethernet connector which uses the EMAC and internal
PHY of the chip. Enable it in the config.

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 configs/pinecube_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
index ea40d227bd53..2741e7ed9079 100644
--- a/configs/pinecube_defconfig
+++ b/configs/pinecube_defconfig
@@ -7,13 +7,13 @@ CONFIG_DRAM_CLK=504
 CONFIG_DRAM_ODT_EN=y
 # CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_SPL_I2C=y
-CONFIG_NO_NET=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
 CONFIG_MTD=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SUN8I_EMAC=y
 CONFIG_AXP209_POWER=y
 CONFIG_AXP_DCDC2_VOLT=1250
 CONFIG_AXP_DCDC3_VOLT=3300
-- 
2.49.0