[PATCH v2 5/7] configs: qualcomm: use fragments for debug UART

[Casey Connolly]

The QCM6490 and QCS9100 targets always enable debug UART, but this is
not really optimal for typical users.

Move these debug UART options to config fragments so that they aren't
enabled by default.

Signed-off-by: Casey Connolly <casey.connolly at linaro.org>
---
 board/qualcomm/debug-qcm6490.config | 5 +++++
 board/qualcomm/debug-qcs9100.config | 5 +++++
 configs/qcm6490_defconfig           | 6 ------
 configs/qcs9100_defconfig           | 6 ------
 4 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/board/qualcomm/debug-qcm6490.config b/board/qualcomm/debug-qcm6490.config
new file mode 100644
index 0000000000000000000000000000000000000000..9ea54758794ef9d2f698cb4026da44be2360147a
--- /dev/null
+++ b/board/qualcomm/debug-qcm6490.config
@@ -0,0 +1,5 @@
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_BASE=0x994000
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_CLOCK=14745600
diff --git a/board/qualcomm/debug-qcs9100.config b/board/qualcomm/debug-qcs9100.config
new file mode 100644
index 0000000000000000000000000000000000000000..8ca042b440d100e9583ff9504f1b0e67a491dfcf
--- /dev/null
+++ b/board/qualcomm/debug-qcs9100.config
@@ -0,0 +1,5 @@
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_BASE=0xA8C000
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_CLOCK=14745600
diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig
index ba26924da161b1c4b5378955185f314b05cb1006..22afa7be1a944e5e0d712ef8aed21ea2b7fa2fa1 100644
--- a/configs/qcm6490_defconfig
+++ b/configs/qcm6490_defconfig
@@ -7,14 +7,8 @@
 
 # Otherwise buildman thinks this isn't an ARM platform
 CONFIG_ARM=y
 
-CONFIG_DEBUG_UART=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_DEBUG_UART_BASE=0x994000
-CONFIG_DEBUG_UART_MSM_GENI=y
-CONFIG_DEBUG_UART_CLOCK=14745600
-
 # Address where U-Boot will be loaded
 CONFIG_TEXT_BASE=0x9fc00000
 CONFIG_REMAKE_ELF=y
 
diff --git a/configs/qcs9100_defconfig b/configs/qcs9100_defconfig
index 10ff4d2539803143c8b770b6b28e8dc52b1d5846..4ceeba63ec12cebbc2124eb256a255450500152f 100644
--- a/configs/qcs9100_defconfig
+++ b/configs/qcs9100_defconfig
@@ -4,14 +4,8 @@
 # a dedicated "uefi" partition for edk2/U-Boot)
 
 #include "qcom_defconfig"
 
-CONFIG_DEBUG_UART=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_DEBUG_UART_BASE=0xA8C000
-CONFIG_DEBUG_UART_MSM_GENI=y
-CONFIG_DEBUG_UART_CLOCK=14745600
-
 # Address where U-Boot will be loaded
 CONFIG_TEXT_BASE=0xaf000000
 CONFIG_REMAKE_ELF=y
 

-- 
2.49.0