[PATCH 07/10] board: adi: Add support for SC584
Greg Malysa
malysagreg at gmail.com
Mon Jun 2 21:44:45 CEST 2025
This adds support for the Analog Devices SC584-EZKIT.
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas at analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal at analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs at analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
Signed-off-by: Greg Malysa <malysagreg at gmail.com>
---
arch/arm/dts/sc584-ezkit.dts | 230 ++++++++++++++++++++++++++
board/adi/sc584-ezkit/Makefile | 6 +
board/adi/sc584-ezkit/sc584-ezkit.c | 21 +++
board/adi/sc584-ezkit/sc584-ezkit.env | 16 +-
configs/sc584-ezkit_defconfig | 108 ++++++++++++
5 files changed, 375 insertions(+), 6 deletions(-)
create mode 100644 board/adi/sc584-ezkit/Makefile
create mode 100644 board/adi/sc584-ezkit/sc584-ezkit.c
create mode 100644 configs/sc584-ezkit_defconfig
diff --git a/arch/arm/dts/sc584-ezkit.dts b/arch/arm/dts/sc584-ezkit.dts
index 4ec6bcfb658..f110418409c 100644
--- a/arch/arm/dts/sc584-ezkit.dts
+++ b/arch/arm/dts/sc584-ezkit.dts
@@ -11,3 +11,233 @@
model = "ADI SC584-EZKIT";
compatible = "adi,sc584-ezkit", "adi,sc58x";
};
+
+&i2c2 {
+ gpio_expander1: mcp23017 at 21 {
+ compatible = "microchip,mcp23017";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ bootph-pre-ram;
+
+ eeprom {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "~eeprom-en";
+ bootph-pre-ram;
+ };
+
+ uart0-flow-en {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "~uart0-flow-en";
+ bootph-pre-ram;
+ };
+
+ uart0-en {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~uart0-en";
+ bootph-pre-ram;
+ };
+
+ mlb {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "~mlb-en";
+ bootph-pre-ram;
+ };
+
+ can0 {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "~can0-en";
+ bootph-pre-ram;
+ };
+
+ can1 {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "~can1-en";
+ bootph-pre-ram;
+ };
+
+ adau1962 {
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~adau1962-en";
+ bootph-pre-ram;
+ };
+
+ adau1979 {
+ gpio-hog;
+ gpios = <9 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~adau1979-en";
+ bootph-pre-ram;
+ };
+
+ audio_jack_sel {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "audio_jack_sel";
+ bootph-pre-ram;
+ };
+
+ spi2d2-d3 {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~spi2d2-d3-en";
+ bootph-pre-ram;
+ };
+
+ spi2flash-cs {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~spi2flash-cs";
+ bootph-pre-ram;
+ };
+
+ spdif-opt {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "~spdif-optical-en";
+ bootph-pre-ram;
+ };
+
+ spdif-dig {
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "~spdif-digital-en";
+ bootph-pre-ram;
+ };
+ };
+
+ gpio_expander2: mcp23017 at 22 {
+ compatible = "microchip,mcp23017";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ bootph-pre-ram;
+
+ pushbutton3 {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~pushbutton3-en";
+ bootph-pre-ram;
+ };
+
+ pushbutton2 {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~pushbutton2-en";
+ bootph-pre-ram;
+ };
+
+ pushbutton1 {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~pushbutton1-en";
+ bootph-pre-ram;
+ };
+
+ leds {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~leds-en";
+ bootph-pre-ram;
+ };
+
+ flg0 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~flg0_loop";
+ bootph-pre-ram;
+ };
+
+ flg1 {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~flg1_loop";
+ bootph-pre-ram;
+ };
+
+ flg2 {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~flg2_loop";
+ bootph-pre-ram;
+ };
+
+ flg3 {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~flg3_loop";
+ bootph-pre-ram;
+ };
+
+ adau1977 {
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~adau1977_en";
+ bootph-pre-ram;
+ };
+
+ adau1977_fault_rst {
+ gpio-hog;
+ gpios = <9 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "~adau1977_fault_rst_en";
+ bootph-pre-ram;
+ };
+
+ thumbwheel {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~thumbwheel_oe";
+ bootph-pre-ram;
+ };
+
+ engine_rpm {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "~engine_rpm_oe";
+ bootph-pre-ram;
+ };
+ };
+};
+
+ð0 {
+ snps,reset-gpio = <&gpio0 ADI_ADSP_PIN('B', 14) GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+ emac0_phy_pwdn {
+ gpio-hog;
+ output-high;
+ gpios = <ADI_ADSP_PIN('C', 15) GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/board/adi/sc584-ezkit/Makefile b/board/adi/sc584-ezkit/Makefile
new file mode 100644
index 00000000000..86f94976cf3
--- /dev/null
+++ b/board/adi/sc584-ezkit/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2025 - Analog Devices, Inc.
+#
+
+obj-y := sc584-ezkit.o
diff --git a/board/adi/sc584-ezkit/sc584-ezkit.c b/board/adi/sc584-ezkit/sc584-ezkit.c
new file mode 100644
index 00000000000..288c2670761
--- /dev/null
+++ b/board/adi/sc584-ezkit/sc584-ezkit.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2025 - Analog Devices, Inc.
+ */
+
+#include <phy.h>
+#include <asm/u-boot.h>
+#include <asm/arch-adi/sc5xx/sc5xx.h>
+#include <asm/arch-adi/sc5xx/soc.h>
+
+int board_phy_config(struct phy_device *phydev)
+{
+ fixup_dp83867_phy(phydev);
+ return 0;
+}
+
+int board_init(void)
+{
+ sc5xx_enable_rgmii();
+ return 0;
+}
diff --git a/board/adi/sc584-ezkit/sc584-ezkit.env b/board/adi/sc584-ezkit/sc584-ezkit.env
index af9a9e01bcf..59b776cea6f 100644
--- a/board/adi/sc584-ezkit/sc584-ezkit.env
+++ b/board/adi/sc584-ezkit/sc584-ezkit.env
@@ -4,10 +4,14 @@
* (C) Copyright 2024 - Analog Devices, Inc.
*/
-#include <env/adi/adi_boot.env>
-
-adi_stage2_offset=0x20000
-adi_image_offset=0xE0000
-adi_rfs_offset=0x6E0000
-loadaddr=0x89300000
+adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
+adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
+adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc584-ezkit.jffs2
+loadaddr=CONFIG_SC5XX_LOADADDR
+
+#define USE_NFS
+#define USE_SPI
+#define USE_RAM
+
+#include <env/adi/adi_boot.env>
diff --git a/configs/sc584-ezkit_defconfig b/configs/sc584-ezkit_defconfig
new file mode 100644
index 00000000000..501fe86ec25
--- /dev/null
+++ b/configs/sc584-ezkit_defconfig
@@ -0,0 +1,108 @@
+CONFIG_ARM=y
+CONFIG_SYS_ARM_CACHE_WRITETHROUGH=y
+CONFIG_ARCH_SC5XX=y
+CONFIG_SYS_MALLOC_LEN=0x100000
+CONFIG_SPL_GPIO=y
+CONFIG_ENV_SIZE=0x4000
+CONFIG_ENV_OFFSET=0xD0000
+CONFIG_ENV_SECT_SIZE=0x4000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK=0x200C0000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL_BSS_START_ADDR=0x200A0000
+CONFIG_SPL_BSS_MAX_SIZE=0x8000
+CONFIG_SC58X=y
+CONFIG_SC5XX_UBOOT_OFFSET=0x20000
+CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
+CONFIG_SC5XX_ROOTFS_OFFSET=0x6E0000
+CONFIG_SC5XX_LOADADDR=0x89300000
+# CONFIG_PACK_FITIMAGE is not set
+# CONFIG_PACK_ROOTFS is not set
+CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
+CONFIG_ADI_BUG_EZKHW21=y
+CONFIG_CGU0_CLKOUTSEL=7
+# CONFIG_EFI_LOADER is not set
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run ramboot"
+CONFIG_SYS_CBSIZE=512
+CONFIG_CYCLIC_MAX_CPU_TIME_US=1000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_I2C=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_ELF is not set
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_PINMUX is not set
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+# CONFIG_OF_TAG_MIGRATE is not set
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SPI_MAX_HZ=10000000
+CONFIG_USE_HOSTNAME=y
+CONFIG_HOSTNAME="sc58x"
+CONFIG_NET_RETRY_COUNT=20
+CONFIG_IP_DEFRAG=y
+CONFIG_USE_GATEWAYIP=y
+CONFIG_GATEWAYIP="192.168.0.1"
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.0.15"
+CONFIG_USE_NETMASK=y
+CONFIG_NETMASK="255.255.255.0"
+CONFIG_USE_ROOTPATH=y
+CONFIG_ROOTPATH="/romfs"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.0.2"
+CONFIG_SPL_CLK=y
+CONFIG_SPL_CLK_CCF=y
+CONFIG_GPIO_HOG=y
+CONFIG_SPL_GPIO_HOG=y
+CONFIG_DM_GPIO_LOOKUP_LABEL=y
+CONFIG_SPL_DM_GPIO_LOOKUP_LABEL=y
+CONFIG_MCP230XX_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_SYS_I2C_ADI=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_DW_ALTDESCRIPTOR=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ADI_SPI3=y
+CONFIG_SPL_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_SC5XX=y
+CONFIG_USB_MUSB_PIO_ONLY=y
+CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
+# CONFIG_REGEX is not set
+# CONFIG_SPL_CRC8 is not set
--
2.45.2
More information about the U-Boot
mailing list