[PATCH v2 04/13] clk: add CONFIG_CLK_AUTO_ID
Michael Nazzareno Trimarchi
michael at amarulasolutions.com
Wed Jun 4 08:48:54 CEST 2025
Hi Patrice
On Wed, Jun 4, 2025 at 8:46 AM Patrice CHOTARD
<patrice.chotard at foss.st.com> wrote:
>
>
>
> On 6/4/25 08:14, Michael Nazzareno Trimarchi wrote:
> > Hi
> >
> > On Wed, Jun 4, 2025 at 8:02 AM Patrice CHOTARD
> > <patrice.chotard at foss.st.com> wrote:
> >>
> >>
> >>
> >> On 5/27/25 15:27, Patrice Chotard wrote:
> >>> From: Patrick Delaunay <patrick.delaunay at foss.st.com>
> >>>
> >>> Add a new config CONFIG_CLK_AUTO_ID to support a unique clk id
> >>> for all the clock providers, managed by clk uclass, when the clock
> >>> reference arg[0] is the same.
> >>>
> >>> When the CONFIG is activated, the clock id is limited to the lower
> >>> CLK_ID_SZ = 24 bits in default clock xlate function
> >>> and the sequence number + 1 of the clk provider device is
> >>> added for the 8 higher bits.
> >>>
> >>> We use sequence number + 1 to avoid the "dummy" clock id = 0,
> >>> used for invalid clock when CCF is activated.
> >>>
> >>> When this config is activated, the new function clk_get_id()
> >>> should be used to get back the internal reference to clock
> >>> for the each clock provider.
> >>>
> >>> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> >>> Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
> >>> Cc: Lukasz Majewski <lukma at denx.de>
> >>> Cc: Sean Anderson <seanga2 at gmail.com>
> >>> ---
> >>>
> >>> (no changes since v1)
> >>>
> >>> drivers/clk/Kconfig | 10 ++++++++++
> >>> drivers/clk/clk-uclass.c | 9 +++++++--
> >>> drivers/clk/stm32/clk-stm32-core.c | 3 ++-
> >>> include/clk.h | 24 ++++++++++++++++++++++++
> >>> include/linux/clk-provider.h | 9 ++++++++-
> >>> 5 files changed, 51 insertions(+), 4 deletions(-)
> >>>
> >>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> >>> index 18bd640a68b..b2e53fe325e 100644
> >>> --- a/drivers/clk/Kconfig
> >>> +++ b/drivers/clk/Kconfig
> >>> @@ -10,6 +10,16 @@ config CLK
> >>> feed into other clocks in a tree structure, with multiplexers to
> >>> choose the source for each clock.
> >>>
> >>> +config CLK_AUTO_ID
> >>> + bool "Enable support of an unique clock id with several provider"
> >>> + depends on CLK
> >>> + help
> >>> + Add the uclass sequence number of clock provider in the 8 higher bits
> >>> + of the clk id to guaranty an unique clock identifier in clk uclass
> >>> + when several clock providers are present on the device and when
> >>> + default xlate are used.
> >>> + This feature limit each identifier for each clock providers (24 bits).
> >>> +
> >>> config SPL_CLK
> >>> bool "Enable clock support in SPL"
> >>> depends on CLK && SPL && SPL_DM
> >>> diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
> >>> index 2167cd5ad0f..7262e89b512 100644
> >>> --- a/drivers/clk/clk-uclass.c
> >>> +++ b/drivers/clk/clk-uclass.c
> >>> @@ -34,6 +34,11 @@ struct clk *dev_get_clk_ptr(struct udevice *dev)
> >>> return (struct clk *)dev_get_uclass_priv(dev);
> >>> }
> >>>
> >>> +ulong clk_get_id(const struct clk *clk)
> >>> +{
> >>> + return (ulong)(clk->id & CLK_ID_MSK);
> >>> +}
> >>> +
> >>> #if CONFIG_IS_ENABLED(OF_PLATDATA)
> >>> int clk_get_by_phandle(struct udevice *dev, const struct phandle_1_arg *cells,
> >>> struct clk *clk)
> >>> @@ -43,7 +48,7 @@ int clk_get_by_phandle(struct udevice *dev, const struct phandle_1_arg *cells,
> >>> ret = device_get_by_ofplat_idx(cells->idx, &clk->dev);
> >>> if (ret)
> >>> return ret;
> >>> - clk->id = cells->arg[0];
> >>> + clk->id = CLK_ID(dev, cells->arg[0]);
> >>>
> >>> return 0;
> >>> }
> >>> @@ -61,7 +66,7 @@ static int clk_of_xlate_default(struct clk *clk,
> >>> }
> >>>
> >>> if (args->args_count)
> >>> - clk->id = args->args[0];
> >>> + clk->id = CLK_ID(clk->dev, args->args[0]);
> >>> else
> >>> clk->id = 0;
> >>>
> >>> diff --git a/drivers/clk/stm32/clk-stm32-core.c b/drivers/clk/stm32/clk-stm32-core.c
> >>> index 358ee56682a..df3b35b1003 100644
> >>> --- a/drivers/clk/stm32/clk-stm32-core.c
> >>> +++ b/drivers/clk/stm32/clk-stm32-core.c
> >>> @@ -46,7 +46,8 @@ int stm32_rcc_init(struct udevice *dev,
> >>>
> >>> if (cfg->setup) {
> >>> clk = cfg->setup(dev, cfg);
> >>> - clk->id = cfg->id;
> >>> + /* set identifier of clock provider*/
> >>> + dev_clk_dm(dev, cfg->id, clk);
> >>> } else {
> >>> dev_err(dev, "failed to register clock %s\n", cfg->name);
> >>> return -ENOENT;
> >>> diff --git a/include/clk.h b/include/clk.h
> >>> index a6ef4e02692..f94135ff778 100644
> >>> --- a/include/clk.h
> >>> +++ b/include/clk.h
> >>> @@ -13,6 +13,15 @@
> >>> #include <linux/errno.h>
> >>> #include <linux/types.h>
> >>>
> >>> +#ifdef CONFIG_CLK_AUTO_ID
> >>> +#define CLK_ID_SZ 24
> >>> +#define CLK_ID_MSK GENMASK(23, 0)
> >>> +#define CLK_ID(dev, id) (((dev_seq(dev) + 1) << CLK_ID_SZ) | ((id) & CLK_ID_MSK))
> >>> +#else
> >>> +#define CLK_ID_MSK (~0UL)
> >>> +#define CLK_ID(dev, id) id
> >>> +#endif
> >>> +
> >>> /**
> >>> * DOC: Overview
> >>> *
> >>> @@ -570,6 +579,16 @@ int clk_get_by_id(ulong id, struct clk **clkp);
> >>> */
> >>> bool clk_dev_binded(struct clk *clk);
> >>>
> >>> +/**
> >>> + * clk_get_id - get clk id
> >>> + *
> >>> + * @clk: A clock struct
> >>> + *
> >>> + * Return: the clock identifier as it is defined by the clock provider in
> >>> + * device tree or in platdata
> >>> + */
> >>> +ulong clk_get_id(const struct clk *clk);
> >>> +
> >>> #else /* CONFIG_IS_ENABLED(CLK) */
> >>>
> >>> static inline int clk_request(struct udevice *dev, struct clk *clk)
> >>> @@ -641,6 +660,11 @@ static inline bool clk_dev_binded(struct clk *clk)
> >>> {
> >>> return false;
> >>> }
> >>> +
> >>> +static inline ulong clk_get_id(const struct clk *clk)
> >>> +{
> >>> + return 0;
> >>> +}
> >>> #endif /* CONFIG_IS_ENABLED(CLK) */
> >>>
> >>> /**
> >>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> >>> index 267757939e0..2d754fa4287 100644
> >>> --- a/include/linux/clk-provider.h
> >>> +++ b/include/linux/clk-provider.h
> >>> @@ -15,10 +15,17 @@
> >>>
> >>> struct udevice;
> >>>
> >>> +/* update clock ID for the dev = clock provider, compatible with CLK_AUTO_ID */
> >>> +static inline void dev_clk_dm(const struct udevice *dev, ulong id, struct clk *clk)
> >>> +{
> >>> + if (!IS_ERR(clk))
> >>> + clk->id = CLK_ID(dev, id);
> >>> +}
> >>> +
> >>> static inline void clk_dm(ulong id, struct clk *clk)
> >>> {
> >>> if (!IS_ERR(clk))
> >>> - clk->id = id;
> >>> + clk->id = CLK_ID(clk->dev, id);
> >>> }
> >>>
> >>> /*
> >> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> >>
> >
> > I think you should ask to be picked by Tom. I don't have objection on this patch
> >
> > Michael
>
> Hi Michael
>
> For which reason ?
> For information, this series has been submitted to CI test : https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/26358
> without any issue.
Because I haven't seen activity on the clock maintainer for months.
Michael
>
> Thanks
> Patrice
>
> >
> >> Thanks
> >> Patrice
> >
> >
> >
--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael at amarulasolutions.com
__________________________________
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info at amarulasolutions.com
www.amarulasolutions.com
More information about the U-Boot
mailing list