[PATCH RFC/RFT 0/2] gpio: qcom: rewritte SPMI gpio driver from Linux driver

Casey Connolly casey.connolly at linaro.org
Wed Jun 4 14:40:57 CEST 2025



On 6/3/25 18:43, Neil Armstrong wrote:
> On 01/04/2025 11:47, Neil Armstrong wrote:
>> The current SPMI gpio driver is very old and doesn't support
>> pin state tracking to fully support the whole pinconf calls.
>>
>> The simplest is to rewritte the driver using the v6.14 Linux
>> driver and fully implement pinctrl, pinmux, pinconf and gpio
>> support using all the newer interfaces.
>>
>> The goal is to deprecate the old one it has been validated
>> on currently supported hardware.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>> ---
>> Neil Armstrong (2):
>>        gpio: qcom: add new driver for SPMI gpios
>>        gpio: qcom: move pm8550 gpio to new driver
>>
>>   drivers/gpio/Makefile         |    2 +-
>>   drivers/gpio/qcom_pmic_gpio.c |   20 +-
>>   drivers/gpio/qcom_spmi_gpio.c | 1035 +++++++++++++++++++++++++++++++ 
>> ++++++++++
>>   3 files changed, 1037 insertions(+), 20 deletions(-)
>> ---
>> base-commit: 5ca70325b64f760bf4190f206a0e88dda495e3d2
>> change-id: 20250401-topic-sm8x50-pmic-gpio-pinctrl-new-2588c35a461c
>>
>> Best regards,
> 
> How should we go forward ?

Unless you have any concerns let's pull this into -next and see what 
happens. I'm preparing a PR atm>
> Neil

-- 
Casey (she/they)



More information about the U-Boot mailing list