[PATCH 6/6] arm: mach-k3: Print version of DM firmware during boot process

[Moteen Shah]

Hey Neha,

On 03/06/25 11:34, Neha Malcom Francis wrote:
> On 28/05/25 13:35, Moteen Shah wrote:
>> Print DM firmware's version in the boot up process of K3 devices.
>>
>> Signed-off-by: Moteen Shah <m-shah at ti.com>
> This patch does not apply cleanly on the latest master, you may have to
> rebase.

I will do a rebase and send a revision for this.
Thanks for the review.

Regards,
Moteen

>
>> ---
>>   arch/arm/mach-k3/am62ax/am62a7_init.c | 4 ++++
>>   arch/arm/mach-k3/am62px/am62p5_init.c | 4 ++++
>>   arch/arm/mach-k3/am62x/am625_init.c   | 4 ++++
>>   arch/arm/mach-k3/am64x/am642_init.c   | 4 ++++
>>   arch/arm/mach-k3/am65x/am654_init.c   | 4 ++++
>>   arch/arm/mach-k3/j721e/j721e_init.c   | 4 ++++
>>   arch/arm/mach-k3/j721s2/j721s2_init.c | 4 ++++
>>   arch/arm/mach-k3/j722s/j722s_init.c   | 4 ++++
>>   arch/arm/mach-k3/j784s4/j784s4_init.c | 4 ++++
>>   9 files changed, 36 insertions(+)
>>
>> diff --git a/arch/arm/mach-k3/am62ax/am62a7_init.c b/arch/arm/mach-k3/am62ax/am62a7_init.c
>> index 52a21277227..5bee04c5c31 100644
>> --- a/arch/arm/mach-k3/am62ax/am62a7_init.c
>> +++ b/arch/arm/mach-k3/am62ax/am62a7_init.c
>> @@ -172,6 +172,10 @@ void board_init_f(ulong dummy)
>>   	/* Output System Firmware version info */
>>   	k3_sysfw_print_ver();
>>   
>> +	/* Output DM Firmware version info */
>> +	if (IS_ENABLED(CONFIG_ARM64))
>> +		k3_dm_print_ver();
>> +
>>   	if (IS_ENABLED(CONFIG_ESM_K3)) {
>>   		/* Probe/configure ESM0 */
>>   		ret = uclass_get_device_by_name(UCLASS_MISC, "esm at 420000", &dev);
>> diff --git a/arch/arm/mach-k3/am62px/am62p5_init.c b/arch/arm/mach-k3/am62px/am62p5_init.c
>> index 01e47deca94..304fdc75736 100644
>> --- a/arch/arm/mach-k3/am62px/am62p5_init.c
>> +++ b/arch/arm/mach-k3/am62px/am62p5_init.c
>> @@ -224,6 +224,10 @@ void board_init_f(ulong dummy)
>>   	/* Output System Firmware version info */
>>   	k3_sysfw_print_ver();
>>   
>> +	/* Output DM Firmware version info */
>> +	if (IS_ENABLED(CONFIG_ARM64))
>> +		k3_dm_print_ver();
>> +
>>   	if (IS_ENABLED(CONFIG_K3_AM62A_DDRSS)) {
>>   		ret = uclass_get_device(UCLASS_RAM, 0, &dev);
>>   		if (ret)
>> diff --git a/arch/arm/mach-k3/am62x/am625_init.c b/arch/arm/mach-k3/am62x/am625_init.c
>> index 595fc391ac5..5bcce365790 100644
>> --- a/arch/arm/mach-k3/am62x/am625_init.c
>> +++ b/arch/arm/mach-k3/am62x/am625_init.c
>> @@ -261,6 +261,10 @@ void board_init_f(ulong dummy)
>>   	/* Output System Firmware version info */
>>   	k3_sysfw_print_ver();
>>   
>> +	/* Output DM Firmware version info */
>> +	if (IS_ENABLED(CONFIG_ARM64))
>> +		k3_dm_print_ver();
>> +
>>   	if (IS_ENABLED(CONFIG_ESM_K3)) {
>>   		/* Probe/configure ESM0 */
>>   		ret = uclass_get_device_by_name(UCLASS_MISC, "esm at 420000", &dev);
>> diff --git a/arch/arm/mach-k3/am64x/am642_init.c b/arch/arm/mach-k3/am64x/am642_init.c
>> index 41812b7dbf7..7a317632e5b 100644
>> --- a/arch/arm/mach-k3/am64x/am642_init.c
>> +++ b/arch/arm/mach-k3/am64x/am642_init.c
>> @@ -242,6 +242,10 @@ void board_init_f(ulong dummy)
>>   	/* Output System Firmware version info */
>>   	k3_sysfw_print_ver();
>>   
>> +	/* Output DM Firmware version info */
>> +	if (IS_ENABLED(CONFIG_ARM64))
>> +		k3_dm_print_ver();
>> +
>>   	do_dt_magic();
>>   
>>   #if defined(CONFIG_ESM_K3)
>> diff --git a/arch/arm/mach-k3/am65x/am654_init.c b/arch/arm/mach-k3/am65x/am654_init.c
>> index a4f038029d7..774ad7feb1d 100644
>> --- a/arch/arm/mach-k3/am65x/am654_init.c
>> +++ b/arch/arm/mach-k3/am65x/am654_init.c
>> @@ -244,6 +244,10 @@ void board_init_f(ulong dummy)
>>   	/* Output System Firmware version info */
>>   	k3_sysfw_print_ver();
>>   
>> +	/* Output DM Firmware version info */
>> +	if (IS_ENABLED(CONFIG_ARM64))
>> +		k3_dm_print_ver();
>> +
>>   	/* Perform board detection */
>>   	do_board_detect();
>>   
>> diff --git a/arch/arm/mach-k3/j721e/j721e_init.c b/arch/arm/mach-k3/j721e/j721e_init.c
>> index f31c20f7ed6..498243485f5 100644
>> --- a/arch/arm/mach-k3/j721e/j721e_init.c
>> +++ b/arch/arm/mach-k3/j721e/j721e_init.c
>> @@ -374,6 +374,10 @@ void board_init_f(ulong dummy)
>>   	/* Output System Firmware version info */
>>   	k3_sysfw_print_ver();
>>   
>> +	/* Output DM Firmware version info */
>> +	if (IS_ENABLED(CONFIG_ARM64))
>> +		k3_dm_print_ver();
>> +
>>   	/* Perform board detection */
>>   	do_board_detect();
>>   
>> diff --git a/arch/arm/mach-k3/j721s2/j721s2_init.c b/arch/arm/mach-k3/j721s2/j721s2_init.c
>> index 5941fa26a95..528590f0434 100644
>> --- a/arch/arm/mach-k3/j721s2/j721s2_init.c
>> +++ b/arch/arm/mach-k3/j721s2/j721s2_init.c
>> @@ -232,6 +232,10 @@ void k3_spl_init(void)
>>   
>>   	/* Output System Firmware version info */
>>   	k3_sysfw_print_ver();
>> +
>> +	/* Output DM Firmware version info */
>> +	if (IS_ENABLED(CONFIG_ARM64))
>> +		k3_dm_print_ver();
>>   }
>>   
>>   bool check_rom_loaded_sysfw(void)
>> diff --git a/arch/arm/mach-k3/j722s/j722s_init.c b/arch/arm/mach-k3/j722s/j722s_init.c
>> index af211377e7c..d8123f282ee 100644
>> --- a/arch/arm/mach-k3/j722s/j722s_init.c
>> +++ b/arch/arm/mach-k3/j722s/j722s_init.c
>> @@ -150,6 +150,10 @@ static void k3_spl_init(void)
>>   
>>   	/* Output System Firmware version info */
>>   	k3_sysfw_print_ver();
>> +
>> +	/* Output DM Firmware version info */
>> +	if (IS_ENABLED(CONFIG_ARM64))
>> +		k3_dm_print_ver();
>>   }
>>   
>>   static void k3_mem_init(void)
>> diff --git a/arch/arm/mach-k3/j784s4/j784s4_init.c b/arch/arm/mach-k3/j784s4/j784s4_init.c
>> index 787cf6261e4..ccf29810849 100644
>> --- a/arch/arm/mach-k3/j784s4/j784s4_init.c
>> +++ b/arch/arm/mach-k3/j784s4/j784s4_init.c
>> @@ -208,6 +208,10 @@ void k3_spl_init(void)
>>   
>>   	/* Output System Firmware version info */
>>   	k3_sysfw_print_ver();
>> +
>> +	/* Output DM Firmware version info */
>> +	if (IS_ENABLED(CONFIG_ARM64))
>> +		k3_dm_print_ver();
>>   }
>>   
>>   void k3_mem_init(void)