[PATCH v2] cmd: bootmenu: permit to select bootmenu entry with a shortcut

[Tom Rini]

On Sun, 25 May 2025 15:43:58 +0200, Christian Marangi wrote:

> Permit to select a bootmenu entry with a key shortcut. This is
> especially useful in production or testing scenario to automate flashing
> procedure or testing procedure.
> 
> The boot entry are changed to append the shortcut key to it.
> 
> Example:
>       1. Run default boot command.
>       2. Boot system via TFTP.
>       3. Boot production system from NAND.
>       4. Boot recovery system from NAND.
>       5. Load production system via TFTP then write to NAND.
>       6. Load recovery system via TFTP then write to NAND.
>       7. Load BL31+U-Boot FIP via TFTP then write to NAND.
>       8. Load BL2 preloader via TFTP then write to NAND.
>       9. Reboot.
>       a. Reset all settings to factory defaults.
>       0. Exit
> 
> [...]

Applied to u-boot/next, thanks!

[1/1] cmd: bootmenu: permit to select bootmenu entry with a shortcut
      commit: 8c986521c3c961338dc86a279757e67e8e23513f
-- 
Tom