[PATCH 2/2] configs: add support for NetCube Systems Kumquat

[Lukas Schmid]

NetCube Systems Kumquat is a board based on the Allwinner V3s SoC,
including:

- 64MB DDR2 included in SoC
- 10/100 Mbps Ethernet
- USB-C DRD
- Audio Codec
- Isolated CAN-FD
- ESP32 over SDIO
- 8MB SPI-NOR Flash for bootloader
- I2C EEPROM for MAC addresses
- SDIO Connector for eMMC or SD-Card
- 8x 12/24V IOs, 4x normally open relays
- DS3232 RTC with Battery Backup
- QWIIC connectors for external I2C devices

Signed-off-by: Lukas Schmid <lukas.schmid at netcube.li>
---
 configs/sun8i_v3s_netcube_kumquat_defconfig | 57 +++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 configs/sun8i_v3s_netcube_kumquat_defconfig

diff --git a/configs/sun8i_v3s_netcube_kumquat_defconfig b/configs/sun8i_v3s_netcube_kumquat_defconfig
new file mode 100644
index 00000000..7a03de16
--- /dev/null
+++ b/configs/sun8i_v3s_netcube_kumquat_defconfig
@@ -0,0 +1,57 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SF_DEFAULT_SPEED=40000000
+CONFIG_ENV_SIZE=0x80000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-netcube-kumquat"
+CONFIG_SPL=y
+CONFIG_ENV_OFFSET_REDUND=0x180000
+CONFIG_MACH_SUN8I_V3S=y
+CONFIG_DRAM_CLK=360
+CONFIG_SPL_SPI_SUNXI=y
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
+# CONFIG_TIMESTAMP is not set
+CONFIG_SPI_BOOT=y
+CONFIG_BOOTDELAY=1
+CONFIG_PREBOOT=""
+# CONFIG_SYS_DEVICE_NULLDEV is not set
+CONFIG_SPL_MTD=y
+CONFIG_SYS_PROMPT="Kumquat> "
+CONFIG_CMD_EEPROM=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_RTC=y
+CONFIG_MTDIDS_DEFAULT="nor0=firmware"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=firmware:1M(u-boot)ro,512k(u-boot-env1),512k(u-boot-env2),-(user)"
+CONFIG_CMD_DIAG=y
+# CONFIG_ENV_IS_IN_FAT is not set
+CONFIG_ENV_SPI_MAX_HZ=1000000
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_USE_HOSTNAME=y
+CONFIG_HOSTNAME="kumquat"
+CONFIG_VERSION_VARIABLE=y
+# CONFIG_USB_FUNCTION_FASTBOOT is not set
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_MISC=y
+CONFIG_NVMEM=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_MTD=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_SUN8I_EMAC=y
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS3232=y
+CONFIG_SPI=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+# CONFIG_USB_ETHER is not set
-- 
2.39.5