[PATCH] ARM: stm32: Fix DBGMCU macro on STM32MP13xx

[Patrice CHOTARD]

On 5/21/25 15:59, Patrice CHOTARD wrote:
> 
> 
> On 5/12/25 18:44, Marek Vasut wrote:
>> The DBGMCU block is available at address 0x50081000 both on STM32MP13xx
>> and on STM32MP15xx . There is no reason to limit the DBGMCU macro being
>> set only on STM32MP15xx , remove the ifdeffery.
>>
>> Signed-off-by: Marek Vasut <marek.vasut at mailbox.org>
>> ---
>> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
>> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
>> Cc: Simon Glass <sjg at chromium.org>
>> Cc: Sughosh Ganu <sughosh.ganu at linaro.org>
>> Cc: Tom Rini <trini at konsulko.com>
>> Cc: u-boot at lists.denx.de
>> Cc: uboot-stm32 at st-md-mailman.stormreply.com
>> ---
>>  arch/arm/mach-stm32mp/include/mach/stm32.h | 2 --
>>  1 file changed, 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
>> index 47b459b75d1..dfba57e7dc4 100644
>> --- a/arch/arm/mach-stm32mp/include/mach/stm32.h
>> +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
>> @@ -78,9 +78,7 @@ enum forced_boot_mode {
>>  #define STM32_RCC_BASE			0x50000000
>>  #define STM32_PWR_BASE			0x50001000
>>  #define STM32_SYSCFG_BASE		0x50020000
>> -#ifdef CONFIG_STM32MP15X
>>  #define STM32_DBGMCU_BASE		0x50081000
>> -#endif
>>  #define STM32_FMC2_BASE			0x58002000
>>  #define STM32_IWDG2_BASE		0x5A002000
>>  #define STM32_DDRCTRL_BASE		0x5A003000
> 
> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> 
> Thanks
> Patrice
Applied to u-boot-stm32/next

Thanks
Patrice