[PATCH 0/9] Support stm32h747-discovery board

Tom Rini trini at konsulko.com
Mon Jun 9 17:50:19 CEST 2025


On Mon, Jun 09, 2025 at 04:40:43PM +0100, Sumit Garg wrote:
> On Mon, Jun 09, 2025 at 03:46:27PM +0200, Dario Binacchi wrote:
> > Hi Sumit,
> > 
> > On Mon, Jun 9, 2025 at 3:25 PM Sumit Garg <sumit.garg at kernel.org> wrote:
> > >
> > > Hi Patrice,
> > >
> > > On Mon, Jun 09, 2025 at 03:15:14PM +0200, Patrice CHOTARD wrote:
> > > >
> > > >
> > > > On 6/7/25 11:37, Dario Binacchi wrote:
> > > > > The series adds support for stm32h747-discovery board.
> > > > >
> > > > > Detailed information can be found at:
> > > > > https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
> > > > >
> > > > >
> > > > > Dario Binacchi (9):
> > > > >   ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles
> > > > >   dt-bindings: arm: stm32: add compatible for stm32h747i-disco board
> > > > >   dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK
> > > > >   ARM: dts: stm32: add uart8 node for stm32h743 MCU
> > > > >   ARM: dts: stm32: add pin map for UART8 controller on stm32h743
> > > > >   ARM: dts: stm32: add an extra pin map for USART1 on stm32h743
> > > > >   ARM: dts: stm32: support STM32h747i-disco board
> > > > >   ARM: dts: stm32: add stm32h747i-disco-u-boot DTS file
> > > > >   board: stm32: add stm32h747-discovery board support
> > > >
> > > >
> > > > Hi Dario
> > > >
> > > > For the whole series
> > > > Applied to u-boot-stm32/next
> > >
> > > Please give some time for other maintainers to review this patch-set.
> > > The dts/upstream patches in this series aren't clean cherry pick from
> > > upstream.
> > 
> > All the commits are already in the mainline Linux kernel, specifically
> > in v6.16-rc1.
> > If you're referring to the fact that the patches can't be applied
> > cleanly, I believe it's
> > because the target path in the Linux kernel doesn't match the one in U-Boot.
> > In fact, the DTS files are located in two different relative paths.
> 
> That's exactly why we have (refer here [1]):
> 
> ./tools/update-subtree.sh pick dts <commit-id-to-be-picked>
> 
> You should have waited v6.16-rc1 tag to be synced into
> devicetree-rebasing [2] for the cherry-picks to work. This way of
> manually patching dts/upstream is not allowed since it is going to break
> DT syncs in one way or another.
> 
> So I would suggest you to wait for v6.16-rc1 to land in DT rebasing tree
> and then send v2 with proper cherry picked patches.
> 
> [1] https://docs.u-boot.org/en/latest/develop/devicetree/control.html#resyncing-with-devicetree-rebasing
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git

To be honest, I don't think this is a big deal. Git will be merging
based on content and not specific hashes. And in the case of conflicts I
just copy the file from the tag to our tree.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20250609/e3f7a0e3/attachment.sig>


More information about the U-Boot mailing list