[PATCH v2 0/2] sunxi: Add NetCube Systems Kumquat support and fix nvmem MAC handling

[Lukas Schmid]

Changes in v2:
  - Renamed the defconfig to match "maker-model" style
  - Use the default env offset and size
  - Disable redundant env to have U-Boot and env fit into first MB of
    SPI-Flash
  - Remove unused config options (SPI_BOOT, CMD_RTC, SPI_FLASH_BAR,
    USB_ETHER_...)
  - Update mtdparts layout to reflect new environment layout

This series adds a defconfig for the NetCube Systems Kumquat and fixes
and issue with setup_environment ignoring the mac-address loaded using
nvmem-cells

Note: This series is based on U-Boot's `next` branch because it depends
on the `sun8i-v3s-netcube-kumquat.dts` device tree, which was recently
synced from upstream Linux and is not yet available in `master`.

Signed-off-by: Lukas Schmid <lukas.schmid at netcube.li>
---
Lukas Schmid (2):
  sunxi: setup_environment: do not generate a MAC address when one is
    set using nvmem-cells
  configs: add support for NetCube Systems Kumquat

 board/sunxi/board.c               | 15 ++++++++++-
 configs/netcube_kumquat_defconfig | 45 +++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+), 1 deletion(-)
 create mode 100644 configs/netcube_kumquat_defconfig

-- 
2.39.5