[PATCH] toradex-smarc-imx8mp: add SPL_STACK size and SPL_HAVE_INIT_STACK

[Hiago De Franco]

From: Hiago De Franco <hiago.franco at toradex.com>

When the toradex-smarc-imx8mp_defconfig file was first added, SPL_STACK
was set to 0x960000, but SPL_HAVE_INIT_STACK wasn't enabled.

This led to SPL_STACK being correctly dropped in commit 25fefa05d732
("configs: Resync with savedefconfig"), since SPL_HAVE_INIT_STACK was
missing, which ended up making the board not boot.

Fix this by adding SPL_STACK back and making sure SPL_HAVE_INIT_STACK is
enabled.

Fixes: dde53eae88d6 ("board: toradex: add Toradex SMARC iMX8MP")
Signed-off-by: Hiago De Franco <hiago.franco at toradex.com>
---
Fabio, Tom: this is for master please, thanks!
---
 configs/toradex-smarc-imx8mp_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/toradex-smarc-imx8mp_defconfig b/configs/toradex-smarc-imx8mp_defconfig
index ca7d9b56efbd..25e6d9623c1d 100644
--- a/configs/toradex-smarc-imx8mp_defconfig
+++ b/configs/toradex-smarc-imx8mp_defconfig
@@ -16,6 +16,7 @@ CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x960000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
 CONFIG_SPL_TEXT_BASE=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
@@ -51,6 +52,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
-- 
2.39.5