[PATCH 6/8] regulator: qcom-rpmh-regulator: add support for pm6150l regulators

[Luca Weiss]

Add the pm6150l regulator data found on the Qualcomm SM6350 platform.
The tables are imported from the Linux driver. The SMPS regulators were
not added now.

Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
---
 drivers/power/regulator/qcom-rpmh-regulator.c | 31 +++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/power/regulator/qcom-rpmh-regulator.c b/drivers/power/regulator/qcom-rpmh-regulator.c
index 954deca5ed75ca4f58898ee401bd06c9da82e56e..0646614256049e49846aa257bd02466fb9cf59d7 100644
--- a/drivers/power/regulator/qcom-rpmh-regulator.c
+++ b/drivers/power/regulator/qcom-rpmh-regulator.c
@@ -456,6 +456,16 @@ static const struct rpmh_vreg_hw_data pmic5_pldo_lv = {
 	.n_modes = ARRAY_SIZE(pmic_mode_map_pmic5_ldo),
 };
 
+static const struct rpmh_vreg_hw_data pmic5_nldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 123, 8000),
+	.n_voltages = 124,
+	.hpm_min_load_uA = 30000,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
+	.n_modes = ARRAY_SIZE(pmic_mode_map_pmic5_ldo),
+};
+
 static const struct rpmh_vreg_hw_data pmic5_nldo515 = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_drms_ops,
@@ -493,6 +503,23 @@ static const struct rpmh_vreg_hw_data pmic5_pldo515_mv = {
 	.supply_name	= _supply_name, \
 }
 
+static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
+	/* smps1 - smps8 are not added to u-boot yet */
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_pldo_lv,   "vdd-l1-l8"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l2-l3"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l2-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-l11"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo,      "vdd-l1-l8"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,      "vdd-l9-l10"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
+	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
+	{}
+};
+
 static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
 	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	{}
@@ -705,6 +732,10 @@ static int rpmh_regulators_bind(struct udevice *dev)
 }
 
 static const struct udevice_id rpmh_regulator_ids[] = {
+	{
+		.compatible = "qcom,pm6150l-rpmh-regulators",
+		.data = (ulong)pm6150l_vreg_data,
+	},
 	{
 		.compatible = "qcom,pm8150-rpmh-regulators",
 		.data = (ulong)pm8150_vreg_data,

-- 
2.50.0