[PATCH] arm: Remove ib62x0 board
Tom Rini
trini at konsulko.com
Fri Jun 20 18:21:42 CEST 2025
This board is unmaintained. Remove it.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
Cc: Stefan Roese <sr at denx.de>
Cc: Tony Dinh <mibodhi at gmail.com>
Cc: Luka Perkov <luka at openwrt.org>
---
arch/arm/mach-kirkwood/Kconfig | 7 --
board/raidsonic/ib62x0/Kconfig | 12 ---
board/raidsonic/ib62x0/MAINTAINERS | 6 --
board/raidsonic/ib62x0/Makefile | 7 --
board/raidsonic/ib62x0/ib62x0.c | 68 -------------
board/raidsonic/ib62x0/ib62x0.h | 29 ------
board/raidsonic/ib62x0/kwbimage.cfg | 153 ----------------------------
configs/ib62x0_defconfig | 63 ------------
include/configs/ib62x0.h | 34 -------
9 files changed, 379 deletions(-)
delete mode 100644 board/raidsonic/ib62x0/Kconfig
delete mode 100644 board/raidsonic/ib62x0/MAINTAINERS
delete mode 100644 board/raidsonic/ib62x0/Makefile
delete mode 100644 board/raidsonic/ib62x0/ib62x0.c
delete mode 100644 board/raidsonic/ib62x0/ib62x0.h
delete mode 100644 board/raidsonic/ib62x0/kwbimage.cfg
delete mode 100644 configs/ib62x0_defconfig
delete mode 100644 include/configs/ib62x0.h
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index f1ccedba5d74..ff53718f991c 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -113,12 +113,6 @@ config TARGET_NETSPACE_V2
select FEROCEON_88FR131
select KIRKWOOD_COMMON
-config TARGET_IB62X0
- bool "ib62x0 Board"
- select FEROCEON_88FR131
- select KW88F6281
- select KIRKWOOD_COMMON
-
config TARGET_DOCKSTAR
bool "Dockstar Board"
select FEROCEON_88FR131
@@ -190,7 +184,6 @@ source "board/d-link/dns325/Kconfig"
source "board/iomega/iconnect/Kconfig"
source "board/LaCie/net2big_v2/Kconfig"
source "board/LaCie/netspace_v2/Kconfig"
-source "board/raidsonic/ib62x0/Kconfig"
source "board/Seagate/dockstar/Kconfig"
source "board/Seagate/goflexhome/Kconfig"
source "board/Seagate/nas220/Kconfig"
diff --git a/board/raidsonic/ib62x0/Kconfig b/board/raidsonic/ib62x0/Kconfig
deleted file mode 100644
index 129aac8b6d46..000000000000
--- a/board/raidsonic/ib62x0/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_IB62X0
-
-config SYS_BOARD
- default "ib62x0"
-
-config SYS_VENDOR
- default "raidsonic"
-
-config SYS_CONFIG_NAME
- default "ib62x0"
-
-endif
diff --git a/board/raidsonic/ib62x0/MAINTAINERS b/board/raidsonic/ib62x0/MAINTAINERS
deleted file mode 100644
index 423aa0cf253a..000000000000
--- a/board/raidsonic/ib62x0/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-IB62X0 BOARD
-M: Luka Perkov <luka at openwrt.org>
-S: Maintained
-F: board/raidsonic/ib62x0/
-F: include/configs/ib62x0.h
-F: configs/ib62x0_defconfig
diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile
deleted file mode 100644
index 3e6bc688e7af..000000000000
--- a/board/raidsonic/ib62x0/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
-
-obj-y := ib62x0.o
diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c
deleted file mode 100644
index 8d1d549a217c..000000000000
--- a/board/raidsonic/ib62x0/ib62x0.c
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011-2012
- * Gerald Kerma <dreagle at doukki.net>
- * Luka Perkov <luka at openwrt.org>
- * Simon Baatz <gmbnomis at gmail.com>
- */
-
-#include <init.h>
-#include <miiphy.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/soc.h>
-#include <asm/arch/mpp.h>
-#include "ib62x0.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- /*
- * default gpio configuration
- * There are maximum 64 gpios controlled through 2 sets of registers
- * the below configuration configures mainly initial LED status
- */
- mvebu_config_gpio(IB62x0_OE_VAL_LOW,
- IB62x0_OE_VAL_HIGH,
- IB62x0_OE_LOW, IB62x0_OE_HIGH);
-
- /* Set SATA activity LEDs to default off */
- writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG);
- /* Multi-Purpose Pins Functionality configuration */
- static const u32 kwmpp_config[] = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP6_SYSRST_OUTn,
- MPP8_TW_SDA,
- MPP9_TW_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP22_GPIO, /* Power LED red */
- MPP24_GPIO, /* Power off device */
- MPP25_GPIO, /* Power LED green */
- MPP27_GPIO, /* USB transfer LED */
- MPP28_GPIO, /* Reset button */
- MPP29_GPIO, /* USB Copy button */
- 0
- };
- kirkwood_mpp_conf(kwmpp_config, NULL);
- return 0;
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
-
- return 0;
-}
diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h
deleted file mode 100644
index 3690e13533ab..000000000000
--- a/board/raidsonic/ib62x0/ib62x0.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011-2012
- * Gerald Kerma <dreagle at doukki.net>
- * Simon Baatz <gmbnomis at gmail.com>
- * Luka Perkov <luka at openwrt.org>
- */
-
-#ifndef __IB62x0_H
-#define __IB62x0_H
-
-#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27))
-#define IB62x0_OE_HIGH (~(0))
-#define IB62x0_OE_VAL_LOW 0
-#define IB62x0_OE_VAL_HIGH 0
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG 10
-#define MV88E1116_CPRSP_CR3_REG 21
-#define MV88E1116_MAC_CTRL_REG 21
-#define MV88E1116_PGADR_REG 22
-#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-
-/* SATAHC related */
-#define MVSATAHC_LED_CONF_REG (MV_SATA_BASE + 0x2C)
-#define MVSATAHC_LED_POLARITY_CTRL (1 << 3)
-
-#endif /* __IB62x0_H */
diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg
deleted file mode 100644
index 1249a0e4bc0a..000000000000
--- a/board/raidsonic/ib62x0/kwbimage.cfg
+++ /dev/null
@@ -1,153 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2011-2012
-# Gerald Kerma <dreagle at doukki.net>
-# Simon Baatz <gmbnomis at gmail.com>
-# Luka Perkov <luka at openwrt.org>
-# Refer doc/README.kwbimage for more details about how-to configure
-# and create kirkwood boot image
-#
-
-# Boot Media configurations
-BOOT_FROM nand
-NAND_ECC_MODE default
-NAND_PAGE_SIZE 0x0800
-
-# SOC registers configuration using bootrom header extension
-# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
-
-# Configure RGMII-0 interface pad voltage to 1.8V
-DATA 0xffd100e0 0x1b1b1b9b
-
-# Dram initalization for SINGLE x16 CL=5 @ 400MHz
-DATA 0xffd01400 0x43000c30 # DDR Configuration register
-# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
-# bit23-14: 0x0,
-# bit24: 0x1, enable exit self refresh mode on DDR access
-# bit25: 0x1, required
-# bit29-26: 0x0,
-# bit31-30: 0x1,
-
-DATA 0xffd01404 0x37543000 # DDR Controller Control Low
-# bit4: 0x0, addr/cmd in smame cycle
-# bit5: 0x0, clk is driven during self refresh, we don't care for APX
-# bit6: 0x0, use recommended falling edge of clk for addr/cmd
-# bit14: 0x0, input buffer always powered up
-# bit18: 0x1, cpu lock transaction enabled
-# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
-# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
-# bit30-28: 0x3, required
-# bit31: 0x0, no additional STARTBURST delay
-
-DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
-# bit3-0: TRAS lsbs
-# bit7-4: TRCD
-# bit11-8: TRP
-# bit15-12: TWR
-# bit19-16: TWTR
-# bit20: TRAS msb
-# bit23-21: 0x0
-# bit27-24: TRRD
-# bit31-28: TRTP
-
-DATA 0xffd0140c 0x00000a33 # DDR Timing (High)
-# bit6-0: TRFC
-# bit8-7: TR2R
-# bit10-9: TR2W
-# bit12-11: TW2W
-# bit31-13: 0x0, required
-
-DATA 0xffd01410 0x0000000c # DDR Address Control
-# bit1-0: 00, Cs0width (x8)
-# bit3-2: 11, Cs0size (1Gb)
-# bit5-4: 00, Cs1width (x8)
-# bit7-6: 11, Cs1size (1Gb)
-# bit9-8: 00, Cs2width (nonexistent)
-# bit11-10: 00, Cs2size (nonexistent)
-# bit13-12: 00, Cs3width (nonexistent)
-# bit15-14: 00, Cs3size (nonexistent)
-# bit16: 0, Cs0AddrSel
-# bit17: 0, Cs1AddrSel
-# bit18: 0, Cs2AddrSel
-# bit19: 0, Cs3AddrSel
-# bit31-20: 0x0, required
-
-DATA 0xffd01414 0x00000000 # DDR Open Pages Control
-# bit0: 0, OpenPage enabled
-# bit31-1: 0x0, required
-
-DATA 0xffd01418 0x00000000 # DDR Operation
-# bit3-0: 0x0, DDR cmd
-# bit31-4: 0x0, required
-
-DATA 0xffd0141c 0x00000c52 # DDR Mode
-# bit2-0: 0x2, BurstLen=2 required
-# bit3: 0x0, BurstType=0 required
-# bit6-4: 0x4, CL=5
-# bit7: 0x0, TestMode=0 normal
-# bit8: 0x0, DLL reset=0 normal
-# bit11-9: 0x6, auto-precharge write recovery
-# bit12: 0x0, PD must be zero
-# bit31-13: 0x0, required
-
-DATA 0xffd01420 0x00000040 # DDR Extended Mode
-# bit0: 0, DDR DLL enabled
-# bit1: 0, DDR drive strenght normal
-# bit2: 1, DDR ODT control lsd (disabled)
-# bit5-3: 0x0, required
-# bit6: 0, DDR ODT control msb, (disabled)
-# bit9-7: 0x0, required
-# bit10: 0, differential DQS enabled
-# bit11: 0, required
-# bit12: 0, DDR output buffer enabled
-# bit31-13: 0x0, required
-
-DATA 0xffd01424 0x0000f17f # DDR Controller Control High
-# bit2-0: 0x7, required
-# bit3: 0x1, MBUS Burst Chop disabled
-# bit6-4: 0x7, required
-# bit7: 0x0,
-# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
-# bit9: 0x0, no half clock cycle addition to dataout
-# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals
-# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh
-# bit15-12: 0xf, required
-# bit31-16: 0, required
-
-DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values)
-DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values)
-
-DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0
-DATA 0xffd01504 0x0ffffff1 # CS[0]n Size
-# bit0: 0x1, Window enabled
-# bit1: 0x0, Write Protect disabled
-# bit3-2: 0x0, CS0 hit selected
-# bit23-4: 0xfffff, required
-# bit31-24: 0x0f, Size (i.e. 256MB)
-
-DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb
-DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled
-
-DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled
-DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled
-
-DATA 0xffd01494 0x00030000 # DDR ODT Control (Low)
-# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1
-# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0
-# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
-# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
-
-DATA 0xffd01498 0x00000000 # DDR ODT Control (High)
-# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above
-# bit3-2: 0x1, ODT1 active NEVER!
-# bit31-4: 0x0, required
-
-DATA 0xffd0149c 0x0000e803 # CPU ODT Control
-DATA 0xffd01480 0x00000001 # DDR Initialization Control
-# bit0: 0x1, enable DDR init upon this register write
-
-DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register
-DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register
-
-# End of Header extension
-DATA 0x0 0x0
diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig
deleted file mode 100644
index 1beb5837bb44..000000000000
--- a/configs/ib62x0_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_ARCH_KIRKWOOD=y
-CONFIG_SYS_KWD_CONFIG="board/raidsonic/ib62x0/kwbimage.cfg"
-CONFIG_TEXT_BASE=0x600000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000
-CONFIG_TARGET_IB62X0=y
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0xE0000
-CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ib62x0"
-CONFIG_SYS_LOAD_ADDR=0x800000
-CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0"
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000"
-CONFIG_USE_PREBOOT=y
-CONFIG_SYS_PBSIZE=1051
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="ib62x0 => "
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_IDE=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000 at 0x0(uboot),0x20000 at 0xe0000(uboot_env),- at 0x100000(root)"
-CONFIG_CMD_UBI=y
-CONFIG_ISO_PARTITION=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NETCONSOLE=y
-CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
-CONFIG_SYS_ATA_STRIDE=4
-CONFIG_SYS_ATA_DATA_OFFSET=0x100
-CONFIG_SYS_ATA_REG_OFFSET=0x100
-CONFIG_SYS_ATA_ALT_OFFSET=0x100
-CONFIG_SYS_ATA_IDE0_OFFSET=0x2000
-CONFIG_SYS_ATA_IDE1_OFFSET=0x4000
-CONFIG_LBA48=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MVGBE=y
-CONFIG_MII=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_LZMA=y
-CONFIG_BZIP2=y
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
deleted file mode 100644
index e1b62f78b21e..000000000000
--- a/include/configs/ib62x0.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011-2012
- * Gerald Kerma <dreagle at doukki.net>
- * Luka Perkov <luka at openwrt.org>
- */
-
-#ifndef _CONFIG_IB62x0_H
-#define _CONFIG_IB62x0_H
-
-#include "mv-common.h"
-
-/*
- * Environment variables configuration
- */
-
-/*
- * Default environment variables
- */
-
-#define CFG_EXTRA_ENV_SETTINGS \
- "console=console=ttyS0,115200\0" \
- "kernel=/boot/zImage\0" \
- "fdt=/boot/ib62x0.dtb\0" \
- "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
-
-/*
- * SATA driver configuration
- */
-#ifdef CONFIG_IDE
-#define __io
-#endif /* CONFIG_IDE */
-
-#endif /* _CONFIG_IB62x0_H */
--
2.43.0
More information about the U-Boot
mailing list