[PATCH] arm: Remove ib62x0 board
Tom Rini
trini at konsulko.com
Sat Jun 21 03:33:21 CEST 2025
On Fri, Jun 20, 2025 at 05:31:05PM -0700, Tony Dinh wrote:
> Hi Tom,
>
> On Fri, Jun 20, 2025 at 9:21 AM Tom Rini <trini at konsulko.com> wrote:
> >
> > This board is unmaintained. Remove it.
> >
> > Signed-off-by: Tom Rini <trini at konsulko.com>
> > ---
> > Cc: Stefan Roese <sr at denx.de>
> > Cc: Tony Dinh <mibodhi at gmail.com>
> > Cc: Luka Perkov <luka at openwrt.org>
> > ---
> > arch/arm/mach-kirkwood/Kconfig | 7 --
> > board/raidsonic/ib62x0/Kconfig | 12 ---
> > board/raidsonic/ib62x0/MAINTAINERS | 6 --
> > board/raidsonic/ib62x0/Makefile | 7 --
> > board/raidsonic/ib62x0/ib62x0.c | 68 -------------
> > board/raidsonic/ib62x0/ib62x0.h | 29 ------
> > board/raidsonic/ib62x0/kwbimage.cfg | 153 ----------------------------
> > configs/ib62x0_defconfig | 63 ------------
> > include/configs/ib62x0.h | 34 -------
> > 9 files changed, 379 deletions(-)
> > delete mode 100644 board/raidsonic/ib62x0/Kconfig
> > delete mode 100644 board/raidsonic/ib62x0/MAINTAINERS
> > delete mode 100644 board/raidsonic/ib62x0/Makefile
> > delete mode 100644 board/raidsonic/ib62x0/ib62x0.c
> > delete mode 100644 board/raidsonic/ib62x0/ib62x0.h
> > delete mode 100644 board/raidsonic/ib62x0/kwbimage.cfg
> > delete mode 100644 configs/ib62x0_defconfig
> > delete mode 100644 include/configs/ib62x0.h
> >
> > diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
> > index f1ccedba5d74..ff53718f991c 100644
> > --- a/arch/arm/mach-kirkwood/Kconfig
> > +++ b/arch/arm/mach-kirkwood/Kconfig
> > @@ -113,12 +113,6 @@ config TARGET_NETSPACE_V2
> > select FEROCEON_88FR131
> > select KIRKWOOD_COMMON
> >
> > -config TARGET_IB62X0
> > - bool "ib62x0 Board"
> > - select FEROCEON_88FR131
> > - select KW88F6281
> > - select KIRKWOOD_COMMON
> > -
> > config TARGET_DOCKSTAR
> > bool "Dockstar Board"
> > select FEROCEON_88FR131
> > @@ -190,7 +184,6 @@ source "board/d-link/dns325/Kconfig"
> > source "board/iomega/iconnect/Kconfig"
> > source "board/LaCie/net2big_v2/Kconfig"
> > source "board/LaCie/netspace_v2/Kconfig"
> > -source "board/raidsonic/ib62x0/Kconfig"
> > source "board/Seagate/dockstar/Kconfig"
> > source "board/Seagate/goflexhome/Kconfig"
> > source "board/Seagate/nas220/Kconfig"
> > diff --git a/board/raidsonic/ib62x0/Kconfig b/board/raidsonic/ib62x0/Kconfig
> > deleted file mode 100644
> > index 129aac8b6d46..000000000000
> > --- a/board/raidsonic/ib62x0/Kconfig
> > +++ /dev/null
> > @@ -1,12 +0,0 @@
> > -if TARGET_IB62X0
> > -
> > -config SYS_BOARD
> > - default "ib62x0"
> > -
> > -config SYS_VENDOR
> > - default "raidsonic"
> > -
> > -config SYS_CONFIG_NAME
> > - default "ib62x0"
> > -
> > -endif
> > diff --git a/board/raidsonic/ib62x0/MAINTAINERS b/board/raidsonic/ib62x0/MAINTAINERS
> > deleted file mode 100644
> > index 423aa0cf253a..000000000000
> > --- a/board/raidsonic/ib62x0/MAINTAINERS
> > +++ /dev/null
> > @@ -1,6 +0,0 @@
> > -IB62X0 BOARD
> > -M: Luka Perkov <luka at openwrt.org>
> > -S: Maintained
> > -F: board/raidsonic/ib62x0/
> > -F: include/configs/ib62x0.h
> > -F: configs/ib62x0_defconfig
> > diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile
> > deleted file mode 100644
> > index 3e6bc688e7af..000000000000
> > --- a/board/raidsonic/ib62x0/Makefile
> > +++ /dev/null
> > @@ -1,7 +0,0 @@
> > -# SPDX-License-Identifier: GPL-2.0+
> > -#
> > -# (C) Copyright 2009
> > -# Marvell Semiconductor <www.marvell.com>
> > -# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> > -
> > -obj-y := ib62x0.o
> > diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c
> > deleted file mode 100644
> > index 8d1d549a217c..000000000000
> > --- a/board/raidsonic/ib62x0/ib62x0.c
> > +++ /dev/null
> > @@ -1,68 +0,0 @@
> > -// SPDX-License-Identifier: GPL-2.0+
> > -/*
> > - * Copyright (C) 2011-2012
> > - * Gerald Kerma <dreagle at doukki.net>
> > - * Luka Perkov <luka at openwrt.org>
> > - * Simon Baatz <gmbnomis at gmail.com>
> > - */
> > -
> > -#include <init.h>
> > -#include <miiphy.h>
> > -#include <asm/global_data.h>
> > -#include <asm/io.h>
> > -#include <asm/arch/cpu.h>
> > -#include <asm/arch/soc.h>
> > -#include <asm/arch/mpp.h>
> > -#include "ib62x0.h"
> > -
> > -DECLARE_GLOBAL_DATA_PTR;
> > -
> > -int board_early_init_f(void)
> > -{
> > - /*
> > - * default gpio configuration
> > - * There are maximum 64 gpios controlled through 2 sets of registers
> > - * the below configuration configures mainly initial LED status
> > - */
> > - mvebu_config_gpio(IB62x0_OE_VAL_LOW,
> > - IB62x0_OE_VAL_HIGH,
> > - IB62x0_OE_LOW, IB62x0_OE_HIGH);
> > -
> > - /* Set SATA activity LEDs to default off */
> > - writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG);
> > - /* Multi-Purpose Pins Functionality configuration */
> > - static const u32 kwmpp_config[] = {
> > - MPP0_NF_IO2,
> > - MPP1_NF_IO3,
> > - MPP2_NF_IO4,
> > - MPP3_NF_IO5,
> > - MPP4_NF_IO6,
> > - MPP5_NF_IO7,
> > - MPP6_SYSRST_OUTn,
> > - MPP8_TW_SDA,
> > - MPP9_TW_SCK,
> > - MPP10_UART0_TXD,
> > - MPP11_UART0_RXD,
> > - MPP18_NF_IO0,
> > - MPP19_NF_IO1,
> > - MPP20_SATA1_ACTn,
> > - MPP21_SATA0_ACTn,
> > - MPP22_GPIO, /* Power LED red */
> > - MPP24_GPIO, /* Power off device */
> > - MPP25_GPIO, /* Power LED green */
> > - MPP27_GPIO, /* USB transfer LED */
> > - MPP28_GPIO, /* Reset button */
> > - MPP29_GPIO, /* USB Copy button */
> > - 0
> > - };
> > - kirkwood_mpp_conf(kwmpp_config, NULL);
> > - return 0;
> > -}
> > -
> > -int board_init(void)
> > -{
> > - /* adress of boot parameters */
> > - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
> > -
> > - return 0;
> > -}
> > diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h
> > deleted file mode 100644
> > index 3690e13533ab..000000000000
> > --- a/board/raidsonic/ib62x0/ib62x0.h
> > +++ /dev/null
> > @@ -1,29 +0,0 @@
> > -/* SPDX-License-Identifier: GPL-2.0+ */
> > -/*
> > - * Copyright (C) 2011-2012
> > - * Gerald Kerma <dreagle at doukki.net>
> > - * Simon Baatz <gmbnomis at gmail.com>
> > - * Luka Perkov <luka at openwrt.org>
> > - */
> > -
> > -#ifndef __IB62x0_H
> > -#define __IB62x0_H
> > -
> > -#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27))
> > -#define IB62x0_OE_HIGH (~(0))
> > -#define IB62x0_OE_VAL_LOW 0
> > -#define IB62x0_OE_VAL_HIGH 0
> > -
> > -/* PHY related */
> > -#define MV88E1116_LED_FCTRL_REG 10
> > -#define MV88E1116_CPRSP_CR3_REG 21
> > -#define MV88E1116_MAC_CTRL_REG 21
> > -#define MV88E1116_PGADR_REG 22
> > -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
> > -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
> > -
> > -/* SATAHC related */
> > -#define MVSATAHC_LED_CONF_REG (MV_SATA_BASE + 0x2C)
> > -#define MVSATAHC_LED_POLARITY_CTRL (1 << 3)
> > -
> > -#endif /* __IB62x0_H */
> > diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg
> > deleted file mode 100644
> > index 1249a0e4bc0a..000000000000
> > --- a/board/raidsonic/ib62x0/kwbimage.cfg
> > +++ /dev/null
> > @@ -1,153 +0,0 @@
> > -# SPDX-License-Identifier: GPL-2.0+
> > -#
> > -# Copyright (C) 2011-2012
> > -# Gerald Kerma <dreagle at doukki.net>
> > -# Simon Baatz <gmbnomis at gmail.com>
> > -# Luka Perkov <luka at openwrt.org>
> > -# Refer doc/README.kwbimage for more details about how-to configure
> > -# and create kirkwood boot image
> > -#
> > -
> > -# Boot Media configurations
> > -BOOT_FROM nand
> > -NAND_ECC_MODE default
> > -NAND_PAGE_SIZE 0x0800
> > -
> > -# SOC registers configuration using bootrom header extension
> > -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
> > -
> > -# Configure RGMII-0 interface pad voltage to 1.8V
> > -DATA 0xffd100e0 0x1b1b1b9b
> > -
> > -# Dram initalization for SINGLE x16 CL=5 @ 400MHz
> > -DATA 0xffd01400 0x43000c30 # DDR Configuration register
> > -# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
> > -# bit23-14: 0x0,
> > -# bit24: 0x1, enable exit self refresh mode on DDR access
> > -# bit25: 0x1, required
> > -# bit29-26: 0x0,
> > -# bit31-30: 0x1,
> > -
> > -DATA 0xffd01404 0x37543000 # DDR Controller Control Low
> > -# bit4: 0x0, addr/cmd in smame cycle
> > -# bit5: 0x0, clk is driven during self refresh, we don't care for APX
> > -# bit6: 0x0, use recommended falling edge of clk for addr/cmd
> > -# bit14: 0x0, input buffer always powered up
> > -# bit18: 0x1, cpu lock transaction enabled
> > -# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
> > -# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
> > -# bit30-28: 0x3, required
> > -# bit31: 0x0, no additional STARTBURST delay
> > -
> > -DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
> > -# bit3-0: TRAS lsbs
> > -# bit7-4: TRCD
> > -# bit11-8: TRP
> > -# bit15-12: TWR
> > -# bit19-16: TWTR
> > -# bit20: TRAS msb
> > -# bit23-21: 0x0
> > -# bit27-24: TRRD
> > -# bit31-28: TRTP
> > -
> > -DATA 0xffd0140c 0x00000a33 # DDR Timing (High)
> > -# bit6-0: TRFC
> > -# bit8-7: TR2R
> > -# bit10-9: TR2W
> > -# bit12-11: TW2W
> > -# bit31-13: 0x0, required
> > -
> > -DATA 0xffd01410 0x0000000c # DDR Address Control
> > -# bit1-0: 00, Cs0width (x8)
> > -# bit3-2: 11, Cs0size (1Gb)
> > -# bit5-4: 00, Cs1width (x8)
> > -# bit7-6: 11, Cs1size (1Gb)
> > -# bit9-8: 00, Cs2width (nonexistent)
> > -# bit11-10: 00, Cs2size (nonexistent)
> > -# bit13-12: 00, Cs3width (nonexistent)
> > -# bit15-14: 00, Cs3size (nonexistent)
> > -# bit16: 0, Cs0AddrSel
> > -# bit17: 0, Cs1AddrSel
> > -# bit18: 0, Cs2AddrSel
> > -# bit19: 0, Cs3AddrSel
> > -# bit31-20: 0x0, required
> > -
> > -DATA 0xffd01414 0x00000000 # DDR Open Pages Control
> > -# bit0: 0, OpenPage enabled
> > -# bit31-1: 0x0, required
> > -
> > -DATA 0xffd01418 0x00000000 # DDR Operation
> > -# bit3-0: 0x0, DDR cmd
> > -# bit31-4: 0x0, required
> > -
> > -DATA 0xffd0141c 0x00000c52 # DDR Mode
> > -# bit2-0: 0x2, BurstLen=2 required
> > -# bit3: 0x0, BurstType=0 required
> > -# bit6-4: 0x4, CL=5
> > -# bit7: 0x0, TestMode=0 normal
> > -# bit8: 0x0, DLL reset=0 normal
> > -# bit11-9: 0x6, auto-precharge write recovery
> > -# bit12: 0x0, PD must be zero
> > -# bit31-13: 0x0, required
> > -
> > -DATA 0xffd01420 0x00000040 # DDR Extended Mode
> > -# bit0: 0, DDR DLL enabled
> > -# bit1: 0, DDR drive strenght normal
> > -# bit2: 1, DDR ODT control lsd (disabled)
> > -# bit5-3: 0x0, required
> > -# bit6: 0, DDR ODT control msb, (disabled)
> > -# bit9-7: 0x0, required
> > -# bit10: 0, differential DQS enabled
> > -# bit11: 0, required
> > -# bit12: 0, DDR output buffer enabled
> > -# bit31-13: 0x0, required
> > -
> > -DATA 0xffd01424 0x0000f17f # DDR Controller Control High
> > -# bit2-0: 0x7, required
> > -# bit3: 0x1, MBUS Burst Chop disabled
> > -# bit6-4: 0x7, required
> > -# bit7: 0x0,
> > -# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
> > -# bit9: 0x0, no half clock cycle addition to dataout
> > -# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals
> > -# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh
> > -# bit15-12: 0xf, required
> > -# bit31-16: 0, required
> > -
> > -DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values)
> > -DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values)
> > -
> > -DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0
> > -DATA 0xffd01504 0x0ffffff1 # CS[0]n Size
> > -# bit0: 0x1, Window enabled
> > -# bit1: 0x0, Write Protect disabled
> > -# bit3-2: 0x0, CS0 hit selected
> > -# bit23-4: 0xfffff, required
> > -# bit31-24: 0x0f, Size (i.e. 256MB)
> > -
> > -DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb
> > -DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled
> > -
> > -DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled
> > -DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled
> > -
> > -DATA 0xffd01494 0x00030000 # DDR ODT Control (Low)
> > -# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1
> > -# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0
> > -# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
> > -# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
> > -
> > -DATA 0xffd01498 0x00000000 # DDR ODT Control (High)
> > -# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above
> > -# bit3-2: 0x1, ODT1 active NEVER!
> > -# bit31-4: 0x0, required
> > -
> > -DATA 0xffd0149c 0x0000e803 # CPU ODT Control
> > -DATA 0xffd01480 0x00000001 # DDR Initialization Control
> > -# bit0: 0x1, enable DDR init upon this register write
> > -
> > -DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register
> > -DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register
> > -
> > -# End of Header extension
> > -DATA 0x0 0x0
> > diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig
> > deleted file mode 100644
> > index 1beb5837bb44..000000000000
> > --- a/configs/ib62x0_defconfig
> > +++ /dev/null
> > @@ -1,63 +0,0 @@
> > -CONFIG_ARM=y
> > -CONFIG_SKIP_LOWLEVEL_INIT=y
> > -CONFIG_SYS_DCACHE_OFF=y
> > -CONFIG_ARCH_CPU_INIT=y
> > -CONFIG_ARCH_KIRKWOOD=y
> > -CONFIG_SYS_KWD_CONFIG="board/raidsonic/ib62x0/kwbimage.cfg"
> > -CONFIG_TEXT_BASE=0x600000
> > -CONFIG_NR_DRAM_BANKS=2
> > -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000
> > -CONFIG_TARGET_IB62X0=y
> > -CONFIG_ENV_SIZE=0x20000
> > -CONFIG_ENV_OFFSET=0xE0000
> > -CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ib62x0"
> > -CONFIG_SYS_LOAD_ADDR=0x800000
> > -CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0"
> > -CONFIG_BOOTDELAY=3
> > -CONFIG_USE_BOOTCOMMAND=y
> > -CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000"
> > -CONFIG_USE_PREBOOT=y
> > -CONFIG_SYS_PBSIZE=1051
> > -# CONFIG_DISPLAY_BOARDINFO is not set
> > -CONFIG_HUSH_PARSER=y
> > -CONFIG_SYS_PROMPT="ib62x0 => "
> > -CONFIG_SYS_MAXARGS=32
> > -CONFIG_CMD_BOOTZ=y
> > -CONFIG_CMD_IDE=y
> > -CONFIG_CMD_NAND=y
> > -CONFIG_CMD_USB=y
> > -# CONFIG_CMD_SETEXPR is not set
> > -CONFIG_CMD_DHCP=y
> > -CONFIG_CMD_MII=y
> > -CONFIG_CMD_PING=y
> > -CONFIG_CMD_EXT2=y
> > -CONFIG_CMD_FAT=y
> > -CONFIG_CMD_JFFS2=y
> > -CONFIG_CMD_MTDPARTS=y
> > -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
> > -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000 at 0x0(uboot),0x20000 at 0xe0000(uboot_env),- at 0x100000(root)"
> > -CONFIG_CMD_UBI=y
> > -CONFIG_ISO_PARTITION=y
> > -CONFIG_OF_CONTROL=y
> > -CONFIG_ENV_OVERWRITE=y
> > -CONFIG_ENV_IS_IN_NAND=y
> > -CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> > -CONFIG_NETCONSOLE=y
> > -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
> > -CONFIG_SYS_ATA_STRIDE=4
> > -CONFIG_SYS_ATA_DATA_OFFSET=0x100
> > -CONFIG_SYS_ATA_REG_OFFSET=0x100
> > -CONFIG_SYS_ATA_ALT_OFFSET=0x100
> > -CONFIG_SYS_ATA_IDE0_OFFSET=0x2000
> > -CONFIG_SYS_ATA_IDE1_OFFSET=0x4000
> > -CONFIG_LBA48=y
> > -# CONFIG_MMC is not set
> > -CONFIG_MTD=y
> > -CONFIG_MTD_RAW_NAND=y
> > -CONFIG_MVGBE=y
> > -CONFIG_MII=y
> > -CONFIG_USB=y
> > -CONFIG_USB_EHCI_HCD=y
> > -CONFIG_USB_STORAGE=y
> > -CONFIG_LZMA=y
> > -CONFIG_BZIP2=y
> > diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
> > deleted file mode 100644
> > index e1b62f78b21e..000000000000
> > --- a/include/configs/ib62x0.h
> > +++ /dev/null
> > @@ -1,34 +0,0 @@
> > -/* SPDX-License-Identifier: GPL-2.0+ */
> > -/*
> > - * Copyright (C) 2011-2012
> > - * Gerald Kerma <dreagle at doukki.net>
> > - * Luka Perkov <luka at openwrt.org>
> > - */
> > -
> > -#ifndef _CONFIG_IB62x0_H
> > -#define _CONFIG_IB62x0_H
> > -
> > -#include "mv-common.h"
> > -
> > -/*
> > - * Environment variables configuration
> > - */
> > -
> > -/*
> > - * Default environment variables
> > - */
> > -
> > -#define CFG_EXTRA_ENV_SETTINGS \
> > - "console=console=ttyS0,115200\0" \
> > - "kernel=/boot/zImage\0" \
> > - "fdt=/boot/ib62x0.dtb\0" \
> > - "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
> > -
> > -/*
> > - * SATA driver configuration
> > - */
> > -#ifdef CONFIG_IDE
> > -#define __io
> > -#endif /* CONFIG_IDE */
> > -
> > -#endif /* _CONFIG_IB62x0_H */
> > --
> > 2.43.0
> >
>
> Please keep this. Even though I don't have this board, we can use the
> Marvell Dreamplug as the surrogate for testing just fine. I'll send in
> patches to modernize it and remove JFFS2.
I thought you might say that Tony, thanks! Just send a patch for
MAINTAINERS for now please.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20250620/6ea7bfc9/attachment.sig>
More information about the U-Boot
mailing list