[PATCH v2 0/2] sunxi: Add NetCube Systems Kumquat support and fix nvmem MAC handling

[Lukas Schmid]

On Dienstag, 10. Juni 2025 07:38:53 CEST Lukas Schmid wrote:
> Changes in v2:
>   - Renamed the defconfig to match "maker-model" style
>   - Use the default env offset and size
>   - Disable redundant env to have U-Boot and env fit into first MB of
>     SPI-Flash
>   - Remove unused config options (SPI_BOOT, CMD_RTC, SPI_FLASH_BAR,
>     USB_ETHER_...)
>   - Update mtdparts layout to reflect new environment layout
> 
> This series adds a defconfig for the NetCube Systems Kumquat and fixes
> and issue with setup_environment ignoring the mac-address loaded using
> nvmem-cells
> 
> Note: This series is based on U-Boot's `next` branch because it depends
> on the `sun8i-v3s-netcube-kumquat.dts` device tree, which was recently
> synced from upstream Linux and is not yet available in `master`.
> 
> Signed-off-by: Lukas Schmid <lukas.schmid at netcube.li>
> ---
> Lukas Schmid (2):
>   sunxi: setup_environment: do not generate a MAC address when one is
>     set using nvmem-cells
>   configs: add support for NetCube Systems Kumquat
> 
>  board/sunxi/board.c               | 15 ++++++++++-
>  configs/netcube_kumquat_defconfig | 45 +++++++++++++++++++++++++++++++
>  2 files changed, 59 insertions(+), 1 deletion(-)
>  create mode 100644 configs/netcube_kumquat_defconfig

Hi Andre,

Just following up on this v2 series sent on June 10th. It's marked as "New" in 
Patchwork and assigned to you, so just checking if it's still on your radar.

Happy to address any further feedback if needed.

Thanks again for your time!

Best,
Lukas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: This is a digitally signed message part.
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20250624/b6ae3c08/attachment.sig>