[PATCH] dts: pcm052: bk4: Use proper compatible for QSPI SPI-NOR memory

[Lukasz Majewski]

In the contemporary U-Boot the "spi-flash" compatible is used only when
CONFIG_$(PHASE_)SPI_FLASH_TINY is defined so spi-nor-tiny.c is compiled.

As vf610 devices are not using SPL at all, the SPI_FLASH_TINY is not
defined and no QSPI flash child nodes are considered as valid ones.

The result is that the 'sf probe' command fails and SPI NOR memory is not
accessible on e.g. BK4 device.

The fix is to use proper compatible - in this case "jedec,spi-nor".

Signed-off-by: Lukasz Majewski <lukma at denx.de>
---
 arch/arm/dts/vf610-pcm052.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/vf610-pcm052.dtsi b/arch/arm/dts/vf610-pcm052.dtsi
index ccdc0f57e2b..2b82b7313dd 100644
--- a/arch/arm/dts/vf610-pcm052.dtsi
+++ b/arch/arm/dts/vf610-pcm052.dtsi
@@ -244,7 +244,7 @@
 	qflash0: spi_flash at 0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spi-flash";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <108000000>;
 		reg = <0>;
 	};
@@ -252,7 +252,7 @@
 	qflash1: spi_flash at 1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spi-flash";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <66000000>;
 		reg = <1>;
 	};
-- 
2.39.5