[PATCH v2 3/4] mtd: nand: Add support for EDO mode 1-5 to IMX6ULL platform

[Michael Nazzareno Trimarchi]

Hi Fabio

Are you going to pick up my last series?

Michael

On Mon, May 26, 2025 at 10:01 PM Michael Nazzareno Trimarchi
<michael at amarulasolutions.com> wrote:
>
> Hi Fabio
>
> On Mon, May 26, 2025 at 9:58 PM Fabio Estevam <festevam at gmail.com> wrote:
> >
> > Hi Michael,
> >
> > On Mon, May 26, 2025 at 4:48 PM Michael Trimarchi
> > <michael at amarulasolutions.com> wrote:
> > >
> > > The clock driver allows to boost the NAND performance
> > > controller. Make changes to let it use the new clock driver
> > >
> > > => time nand read ${loadaddr} kernel
> > >
> > > NAND read: device 0 offset 0x500000, size 0x800000
> > >  8388608 bytes read: OK
> > >
> > > time: 0.488 seconds
> >
> > Out of curiosity: what was the original read time without the clock
> > driver being used?
>
> The downstream driver I made 2 years ago before this change was around
> 3/3.5mB/sec, if I remember correctly.
> One point all the IMX6 platforms can then be migrated but I don't have
> any board with me.
>
> Michael
>
>
> --
> Michael Nazzareno Trimarchi
> Co-Founder & Chief Executive Officer
> M. +39 347 913 2170
> michael at amarulasolutions.com
> __________________________________
>
> Amarula Solutions BV
> Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
> T. +31 (0)85 111 9172
> info at amarulasolutions.com
> www.amarulasolutions.com



-- 
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael at amarulasolutions.com
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info at amarulasolutions.com
www.amarulasolutions.com