[PATCH v2 1/7] arm: mach-k3: Add config option for booting HSM core

[Beleswar Padhi]

Some K3 SoCs like J721S2, and J784S4 have a HSM (High Security Module)
M4F core in the Wakeup Voltage Domain which could be used to run secure
services like Authentication. Add a config option which indicates that
the SoC has a HSM core and the firmware for the core is available.

Signed-off-by: Beleswar Padhi <b-padhi at ti.com>
---
v2: Changelog:
1. Removed 'default = n' line from CONFIG.

Link to v1:
https://lore.kernel.org/all/20250422095430.363792-2-b-padhi@ti.com/

 arch/arm/mach-k3/Kconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 1b8c0b1eb96..8448f23c053 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -181,6 +181,13 @@ config K3_REMOTEPROC_PRU
 	imply REMOTEPROC_TI_PRU
 	default y if (SOC_K3_AM642 || SOC_K3_AM654)
 
+config K3_HSM_FW
+	bool "Load and Boot HSM core"
+	help
+	  Enabling this will indicate that the system has a HSM (High Security
+	  Module) M4 Core and the firmware for the core is present. When
+	  enabled, HSM core will be booted at R5 SPL execution time.
+
 if CPU_V7R
 source "arch/arm/mach-k3/r5/Kconfig"
 endif
-- 
2.34.1