[PATCH v2 0/7] Add support to boot TI K3 HSM M4 core

[Tom Rini]

On Tue, May 06, 2025 at 10:47:57PM +0530, Kumar, Udit wrote:
> 
> On 5/6/2025 8:38 PM, Andrew Davis wrote:
> > On 5/6/25 9:51 AM, Beleswar Prasad Padhi wrote:
> > > Hi Andrew,
> > > 
> > > On 5/6/2025 4:38 PM, Andrew Davis wrote:
> > > > On 5/6/25 5:41 AM, Beleswar Padhi wrote:
> > > > > Some TI K3 SoCs like J721S2, and J784S4 have a HSM (High Security
> > > > > Module) M4F core in the Wakeup Voltage Domain which could be used to
> > > > > run secure services like Authentication. Boot flow for HSM M4 core is
> > > > > different than the general purpose M4F cores, and is as below:
> > > > > 
> > > > 
> > > > The below flow looks exactly like the general purpose M4F cores..
> > > > Why is the HSM core treated differently and this loader not made into
> > > > a normal remote proc driver?
> > > 
> > > 
> > > Not exactly, HSM core is treated differently because of following
> > > exceptions:
> > > 1. Device operations for HSM core (like reset/reset release) are not
> > > handled by DM. TIFS handles that with proc_boot_ctrl TI-SCI calls.
> > 
> > This could be added to the commit message then.
> > 
> > > 2. The HSM firmware is not an ELF image. So we can't use rproc elf
> > > loader with it. Manual memcpy has to be done.
> > > 
> > 
> > Why is the HSM firmware not an ELF image?
> 
> 
> HSM firmwares are loaded by TIFS (in non-GP) flow, and TIFS does not have
> elf parser.

And to be clear, why is that? Since it's preventing the use other
existing workflows...

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20250506/8e4b36b3/attachment.sig>