[PATCH v3 4/4] configs: qcs9100: Enable env in SCSI

[Casey Connolly]

Hi Varadarajan,

On 5/7/25 13:28, Varadarajan Narayanan wrote:
> Enable CONFIG_ENV_IS_IN_SCSI to store environment variables in SCSI.
> Set env variables partition UUID as seen in qcs9100 based boards.
> 
> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> ---
> v3: s/CONFIG_SCSI_ENV_PART/CONFIG_SCSI_ENV_PART_UUID
> ---
>   configs/qcs9100_defconfig | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/configs/qcs9100_defconfig b/configs/qcs9100_defconfig
> index 10ff4d25398..cd48973599b 100644
> --- a/configs/qcs9100_defconfig
> +++ b/configs/qcs9100_defconfig
> @@ -14,5 +14,8 @@ CONFIG_DEBUG_UART_CLOCK=14745600
>   # Address where U-Boot will be loaded
>   CONFIG_TEXT_BASE=0xaf000000
>   CONFIG_REMAKE_ELF=y
> -
>   CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs9100-ride-r3"
> +CONFIG_ENV_IS_IN_SCSI=y
> +CONFIG_SCSI_ENV_PART_UUID="71cb9cd0-acf1-b6cb-ad91-be9572fe11a9"

Could you also update the RDP documentation to describe firstly that env 
is loaded from a partition, and then reference this GUID and which 
partition it is.

As Tom mentioned before, doing it on FAT would make it much easier to 
tinker with, but I guess it's better to match what you're doing in 
production, just as long as it's documented...

Kind regards,> +# CONFIG_ENV_IS_DEFAULT is not set
> +# CONFIG_ENV_IS_NOWHERE is not set
-- 
Casey (she/they)