[PATCH v4 15/22] arm: qemu: Add a 64-bit SPL build
Simon Glass
sjg at chromium.org
Sat May 10 15:42:13 CEST 2025
Add an 64-bit SPL build for qemu so we can test the standard passage
feature.
Include a binman definition so that SPL and U-Boot are in the same image.
This requires adding a proper devicetree file for qemu_arm. It is only
used for the SPL build.
Avoid using the QEMU devicetree in U-Boot proper, so we can obtain it
from standard passage.
For now this just boots and hangs in SPL as there is no bloblist.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
(no changes since v3)
Changes in v3:
- Add a build for aarch64 as well
arch/arm/dts/qemu-arm64-u-boot.dtsi | 29 ++
arch/arm/dts/qemu-arm64.dts | 387 ++++++++++++++++++++++++++-
arch/arm/mach-qemu/Kconfig | 10 +-
board/emulation/qemu-arm/Kconfig | 5 +-
board/emulation/qemu-arm/MAINTAINERS | 1 +
configs/qemu_arm64_spl_defconfig | 90 +++++++
doc/board/emulation/qemu-arm.rst | 41 ++-
scripts/build-qemu.sh | 6 +-
8 files changed, 563 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/dts/qemu-arm64-u-boot.dtsi
create mode 100644 configs/qemu_arm64_spl_defconfig
diff --git a/arch/arm/dts/qemu-arm64-u-boot.dtsi b/arch/arm/dts/qemu-arm64-u-boot.dtsi
new file mode 100644
index 00000000000..31847e9518e
--- /dev/null
+++ b/arch/arm/dts/qemu-arm64-u-boot.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Sample device tree for qemu_arm
+
+ * Copyright 2021 Google LLC
+ */
+
+/ {
+ binman {
+ u-boot-spl {
+ size = <0x10000>;
+ };
+
+ u-boot {
+ };
+ };
+
+ pl011 at 9000000 {
+ bootph,pre-ram;
+ };
+
+ pl031 at 9010000 {
+ bootph,pre-ram;
+ };
+
+ pl061 at 9030000 {
+ bootph,pre-ram;
+ };
+};
diff --git a/arch/arm/dts/qemu-arm64.dts b/arch/arm/dts/qemu-arm64.dts
index 95fcf53ed74..62e29cb01fb 100644
--- a/arch/arm/dts/qemu-arm64.dts
+++ b/arch/arm/dts/qemu-arm64.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
- * Empty device tree for qemu_arm64
+ * Device tree for qemu_arm64
* Copyright 2021 Google LLC
*/
@@ -13,3 +13,388 @@
/ {
};
+
+#ifdef CONFIG_TARGET_QEMU_ARM_64BIT_SPL
+
+/ {
+ interrupt-parent = <0x00008002>;
+ model = "linux,dummy-virt";
+ #size-cells = <0x00000002>;
+ #address-cells = <0x00000002>;
+ compatible = "linux,dummy-virt";
+ psci {
+ migrate = <0xc4000005>;
+ cpu_on = <0xc4000003>;
+ cpu_off = <0x84000002>;
+ cpu_suspend = <0xc4000001>;
+ method = "hvc";
+ compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
+ };
+ memory at 40000000 {
+ reg = <0x00000000 0x40000000 0x00000000 0x08000000>;
+ device_type = "memory";
+ };
+ platform-bus at c000000 {
+ interrupt-parent = <0x00008002>;
+ ranges = <0x00000000 0x00000000 0x0c000000 0x02000000>;
+ #address-cells = <0x00000001>;
+ #size-cells = <0x00000001>;
+ compatible = "qemu,platform", "simple-bus";
+ };
+ fw-cfg at 9020000 {
+ dma-coherent;
+ reg = <0x00000000 0x09020000 0x00000000 0x00000018>;
+ compatible = "qemu,fw-cfg-mmio";
+ };
+ virtio_mmio at a000000 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000010 0x00000001>;
+ reg = <0x00000000 0x0a000000 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a000200 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000011 0x00000001>;
+ reg = <0x00000000 0x0a000200 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a000400 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000012 0x00000001>;
+ reg = <0x00000000 0x0a000400 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a000600 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000013 0x00000001>;
+ reg = <0x00000000 0x0a000600 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a000800 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000014 0x00000001>;
+ reg = <0x00000000 0x0a000800 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a000a00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000015 0x00000001>;
+ reg = <0x00000000 0x0a000a00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a000c00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000016 0x00000001>;
+ reg = <0x00000000 0x0a000c00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a000e00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000017 0x00000001>;
+ reg = <0x00000000 0x0a000e00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a001000 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000018 0x00000001>;
+ reg = <0x00000000 0x0a001000 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a001200 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000019 0x00000001>;
+ reg = <0x00000000 0x0a001200 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a001400 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000001a 0x00000001>;
+ reg = <0x00000000 0x0a001400 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a001600 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000001b 0x00000001>;
+ reg = <0x00000000 0x0a001600 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a001800 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000001c 0x00000001>;
+ reg = <0x00000000 0x0a001800 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a001a00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000001d 0x00000001>;
+ reg = <0x00000000 0x0a001a00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a001c00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000001e 0x00000001>;
+ reg = <0x00000000 0x0a001c00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a001e00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000001f 0x00000001>;
+ reg = <0x00000000 0x0a001e00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a002000 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000020 0x00000001>;
+ reg = <0x00000000 0x0a002000 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a002200 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000021 0x00000001>;
+ reg = <0x00000000 0x0a002200 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a002400 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000022 0x00000001>;
+ reg = <0x00000000 0x0a002400 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a002600 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000023 0x00000001>;
+ reg = <0x00000000 0x0a002600 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a002800 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000024 0x00000001>;
+ reg = <0x00000000 0x0a002800 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a002a00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000025 0x00000001>;
+ reg = <0x00000000 0x0a002a00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a002c00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000026 0x00000001>;
+ reg = <0x00000000 0x0a002c00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a002e00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000027 0x00000001>;
+ reg = <0x00000000 0x0a002e00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a003000 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000028 0x00000001>;
+ reg = <0x00000000 0x0a003000 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a003200 {
+ dma-coherent;
+ interrupts = <0x00000000 0x00000029 0x00000001>;
+ reg = <0x00000000 0x0a003200 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a003400 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000002a 0x00000001>;
+ reg = <0x00000000 0x0a003400 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a003600 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000002b 0x00000001>;
+ reg = <0x00000000 0x0a003600 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a003800 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000002c 0x00000001>;
+ reg = <0x00000000 0x0a003800 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a003a00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000002d 0x00000001>;
+ reg = <0x00000000 0x0a003a00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a003c00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000002e 0x00000001>;
+ reg = <0x00000000 0x0a003c00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ virtio_mmio at a003e00 {
+ dma-coherent;
+ interrupts = <0x00000000 0x0000002f 0x00000001>;
+ reg = <0x00000000 0x0a003e00 0x00000000 0x00000200>;
+ compatible = "virtio,mmio";
+ };
+ gpio-keys {
+ compatible = "gpio-keys";
+ poweroff {
+ gpios = <0x00008004 0x00000003 0x00000000>;
+ linux,code = <0x00000074>;
+ label = "GPIO Key Poweroff";
+ };
+ };
+ pl061 at 9030000 {
+ phandle = <0x00008004>;
+ clock-names = "apb_pclk";
+ clocks = <0x00008000>;
+ interrupts = <0x00000000 0x00000007 0x00000004>;
+ gpio-controller;
+ #gpio-cells = <0x00000002>;
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x00000000 0x09030000 0x00000000 0x00001000>;
+ };
+ pcie at 10000000 {
+ interrupt-map-mask = <0x00001800 0x00000000 0x00000000 0x00000007>;
+ interrupt-map = <0x00000000 0x00000000 0x00000000 0x00000001
+ 0x00008002 0x00000000 0x00000000 0x00000000
+ 0x00000003 0x00000004 0x00000000 0x00000000
+ 0x00000000 0x00000002 0x00008002 0x00000000
+ 0x00000000 0x00000000 0x00000004 0x00000004
+ 0x00000000 0x00000000 0x00000000 0x00000003
+ 0x00008002 0x00000000 0x00000000 0x00000000
+ 0x00000005 0x00000004 0x00000000 0x00000000
+ 0x00000000 0x00000004 0x00008002 0x00000000
+ 0x00000000 0x00000000 0x00000006 0x00000004
+ 0x00000800 0x00000000 0x00000000 0x00000001
+ 0x00008002 0x00000000 0x00000000 0x00000000
+ 0x00000004 0x00000004 0x00000800 0x00000000
+ 0x00000000 0x00000002 0x00008002 0x00000000
+ 0x00000000 0x00000000 0x00000005 0x00000004
+ 0x00000800 0x00000000 0x00000000 0x00000003
+ 0x00008002 0x00000000 0x00000000 0x00000000
+ 0x00000006 0x00000004 0x00000800 0x00000000
+ 0x00000000 0x00000004 0x00008002 0x00000000
+ 0x00000000 0x00000000 0x00000003 0x00000004
+ 0x00001000 0x00000000 0x00000000 0x00000001
+ 0x00008002 0x00000000 0x00000000 0x00000000
+ 0x00000005 0x00000004 0x00001000 0x00000000
+ 0x00000000 0x00000002 0x00008002 0x00000000
+ 0x00000000 0x00000000 0x00000006 0x00000004
+ 0x00001000 0x00000000 0x00000000 0x00000003
+ 0x00008002 0x00000000 0x00000000 0x00000000
+ 0x00000003 0x00000004 0x00001000 0x00000000
+ 0x00000000 0x00000004 0x00008002 0x00000000
+ 0x00000000 0x00000000 0x00000004 0x00000004
+ 0x00001800 0x00000000 0x00000000 0x00000001
+ 0x00008002 0x00000000 0x00000000 0x00000000
+ 0x00000006 0x00000004 0x00001800 0x00000000
+ 0x00000000 0x00000002 0x00008002 0x00000000
+ 0x00000000 0x00000000 0x00000003 0x00000004
+ 0x00001800 0x00000000 0x00000000 0x00000003
+ 0x00008002 0x00000000 0x00000000 0x00000000
+ 0x00000004 0x00000004 0x00001800 0x00000000
+ 0x00000000 0x00000004 0x00008002 0x00000000
+ 0x00000000 0x00000000 0x00000005 0x00000004>;
+ #interrupt-cells = <0x00000001>;
+ ranges = <0x01000000 0x00000000
+ 0x00000000 0x00000000 0x3eff0000 0x00000000
+ 0x00010000 0x02000000 0x00000000 0x10000000
+ 0x00000000 0x10000000 0x00000000 0x2eff0000
+ 0x03000000 0x00000080 0x00000000 0x00000080
+ 0x00000000 0x00000080 0x00000000>;
+ reg = <0x00000040 0x10000000 0x00000000 0x10000000>;
+ msi-map = <0x00000000 0x00008003 0x00000000 0x00010000>;
+ dma-coherent;
+ bus-range = <0x00000000 0x000000ff>;
+ linux,pci-domain = <0x00000000>;
+ #size-cells = <0x00000002>;
+ #address-cells = <0x00000003>;
+ device_type = "pci";
+ compatible = "pci-host-ecam-generic";
+ };
+ pl031 at 9010000 {
+ clock-names = "apb_pclk";
+ clocks = <0x00008000>;
+ interrupts = <0x00000000 0x00000002 0x00000004>;
+ reg = <0x00000000 0x09010000 0x00000000 0x00001000>;
+ compatible = "arm,pl031", "arm,primecell";
+ };
+ pl011 at 9000000 {
+ clock-names = "uartclk", "apb_pclk";
+ clocks = <0x00008000 0x00008000>;
+ interrupts = <0x00000000 0x00000001 0x00000004>;
+ reg = <0x00000000 0x09000000 0x00000000 0x00001000>;
+ compatible = "arm,pl011", "arm,primecell";
+ };
+ pmu {
+ interrupts = <0x00000001 0x00000007 0x00000104>;
+ compatible = "arm,armv8-pmuv3";
+ };
+ intc at 8000000 {
+ phandle = <0x00008002>;
+ reg = <0x00000000 0x08000000 0x00000000 0x00010000
+ 0x00000000 0x08010000 0x00000000 0x00010000>;
+ compatible = "arm,cortex-a15-gic";
+ ranges;
+ #size-cells = <0x00000002>;
+ #address-cells = <0x00000002>;
+ interrupt-controller;
+ #interrupt-cells = <0x00000003>;
+ v2m at 8020000 {
+ phandle = <0x00008003>;
+ reg = <0x00000000 0x08020000 0x00000000 0x00001000>;
+ msi-controller;
+ compatible = "arm,gic-v2m-frame";
+ };
+ };
+ flash at 0 {
+ bank-width = <0x00000004>;
+ reg = <0x00000000 0x00000000 0x00000000 0x04000000
+ 0x00000000 0x04000000 0x00000000 0x04000000>;
+ compatible = "cfi-flash";
+ };
+ cpus {
+ #size-cells = <0x00000000>;
+ #address-cells = <0x00000001>;
+ cpu-map {
+ socket0 {
+ cluster0 {
+ core0 {
+ cpu = <0x00008001>;
+ };
+ };
+ };
+ };
+ cpu at 0 {
+ phandle = <0x00008001>;
+ reg = <0x00000000>;
+ compatible = "arm,cortex-a57";
+ device_type = "cpu";
+ };
+ };
+ timer {
+ interrupts = <0x00000001 0x0000000d 0x00000104 0x00000001
+ 0x0000000e 0x00000104 0x00000001 0x0000000b
+ 0x00000104 0x00000001 0x0000000a 0x00000104>;
+ always-on;
+ compatible = "arm,armv8-timer", "arm,armv7-timer";
+ };
+ apb-pclk {
+ phandle = <0x00008000>;
+ clock-output-names = "clk24mhz";
+ clock-frequency = <0x016e3600>;
+ #clock-cells = <0x00000000>;
+ compatible = "fixed-clock";
+ };
+ chosen {
+ stdout-path = "/pl011 at 9000000";
+ rng-seed = <0x5c62d159 0x4f1ac320 0x51089618 0xfa6e4367
+ 0x5cb012b5 0xfe4e6a54 0x8c970c5d 0xeb9bec3c>;
+ kaslr-seed = <0x358a89d6 0x32217e8d>;
+ };
+};
+
+#endif
diff --git a/arch/arm/mach-qemu/Kconfig b/arch/arm/mach-qemu/Kconfig
index 292c5f65c8e..1aea7205da4 100644
--- a/arch/arm/mach-qemu/Kconfig
+++ b/arch/arm/mach-qemu/Kconfig
@@ -36,9 +36,17 @@ config TARGET_QEMU_ARM_SBSA
select ENABLE_ARM_SOC_BOOT0_HOOK
select MISC_INIT_R
+config TARGET_QEMU_ARM_64BIT_SPL
+ bool "ARMv8, 64bit with SPL"
+ select ARM64
+ select BOARD_LATE_INIT
+ select SPL
+ select BINMAN
+
endchoice
-if TARGET_QEMU_ARM_32BIT || TARGET_QEMU_ARM_64BIT || TARGET_QEMU_ARM_32BIT_SPL
+if TARGET_QEMU_ARM_32BIT || TARGET_QEMU_ARM_64BIT || \
+ TARGET_QEMU_ARM_32BIT_SPL || TARGET_QEMU_ARM_64BIT_SPL
config SYS_BOARD
default "qemu-arm"
diff --git a/board/emulation/qemu-arm/Kconfig b/board/emulation/qemu-arm/Kconfig
index 2a8f052c0da..d35caa16d8f 100644
--- a/board/emulation/qemu-arm/Kconfig
+++ b/board/emulation/qemu-arm/Kconfig
@@ -31,7 +31,7 @@ config BOARD_SPECIFIC_OPTIONS
endif
-if TARGET_QEMU_ARM_32BIT_SPL
+if TARGET_QEMU_ARM_32BIT_SPL || TARGET_QEMU_ARM_64BIT_SPL
config SPL_TEXT_BASE
default 0x00000000
@@ -39,6 +39,9 @@ config SPL_TEXT_BASE
config TEXT_BASE
default 0x00010000
+config SPL_MAX_SIZE
+ default 0x00010000
+
endif
source "board/emulation/common/Kconfig"
diff --git a/board/emulation/qemu-arm/MAINTAINERS b/board/emulation/qemu-arm/MAINTAINERS
index 54682d6c0af..bb3168d47a7 100644
--- a/board/emulation/qemu-arm/MAINTAINERS
+++ b/board/emulation/qemu-arm/MAINTAINERS
@@ -8,6 +8,7 @@ F: include/configs/qemu-sbsa.h
F: configs/qemu_arm_defconfig
F: configs/qemu_arm64_acpi_defconfig
F: configs/qemu_arm64_defconfig
+F: configs/qemu_arm64_spl_defconfig
F: configs/qemu-arm-sbsa_defconfig
QEMU ARM 'VIRT' BOARD
diff --git a/configs/qemu_arm64_spl_defconfig b/configs/qemu_arm64_spl_defconfig
new file mode 100644
index 00000000000..a9ed47c8d3b
--- /dev/null
+++ b/configs/qemu_arm64_spl_defconfig
@@ -0,0 +1,90 @@
+CONFIG_ARM=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_QEMU=y
+CONFIG_SYS_MALLOC_LEN=0x1000000
+CONFIG_BLOBLIST_SIZE_RELOC=0x2000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200000
+CONFIG_ENV_SIZE=0x40000
+CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_DEFAULT_DEVICE_TREE="qemu-arm64"
+CONFIG_TARGET_QEMU_ARM_64BIT_SPL=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x9000
+CONFIG_SYS_LOAD_ADDR=0x40200000
+CONFIG_DEBUG_UART_BASE=0x9000000
+CONFIG_DEBUG_UART_CLOCK=0
+CONFIG_ARMV8_CRYPTO=y
+CONFIG_ENV_ADDR=0x4000000
+CONFIG_QEMU_MANUAL_DTB=y
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_EFI_HTTP_BOOT=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_BOOTSTD_FULL=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_USE_PREBOOT=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_PCI_INIT_R=y
+CONFIG_BLOBLIST=y
+CONFIG_SPL_FRAMEWORK_BOARD_INIT_F=y
+CONFIG_SPL_NO_BSS_LIMIT=y
+# CONFIG_SPL_SEPARATE_BSS is not set
+CONFIG_CMD_SMBIOS=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_BOOTEFI_SELFTEST=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_TPM=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_BOARD=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_SPL_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_DFU_TFTP=y
+CONFIG_DFU_MTD=y
+CONFIG_DFU_RAM=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_SHOW_PROGRESS=0
+CONFIG_CFI_FLASH=y
+CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_SECT=256
+CONFIG_SYS_MAX_FLASH_BANKS=2
+CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
+CONFIG_E1000=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_ECAM_GENERIC=y
+CONFIG_SCSI=y
+CONFIG_DEBUG_UART_PL011=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSINFO=y
+CONFIG_SYSINFO_SMBIOS=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_CMD_POWEROFF=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_TPM2_MMIO=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_PCI=y
+CONFIG_SEMIHOSTING=y
+CONFIG_MBEDTLS_LIB=y
+CONFIG_TPM=y
+CONFIG_TPM_PCR_ALLOCATE=y
+CONFIG_GENERATE_SMBIOS_TABLE_VERBOSE=y
diff --git a/doc/board/emulation/qemu-arm.rst b/doc/board/emulation/qemu-arm.rst
index a8a1ba0e0f9..b03cb882c86 100644
--- a/doc/board/emulation/qemu-arm.rst
+++ b/doc/board/emulation/qemu-arm.rst
@@ -43,6 +43,11 @@ Set the CROSS_COMPILE environment variable as usual, and run:
make qemu_arm_spl_defconfig
make
+- for AArch64 with SPL::
+
+ make qemu_arm64_spl_defconfig
+ make
+
Running U-Boot
--------------
The minimal QEMU command line to get U-Boot up and running is:
@@ -59,6 +64,10 @@ The minimal QEMU command line to get U-Boot up and running is:
qemu-system-arm -machine virt -nographic -bios image.bin
+- For AArch64 with SPL::
+
+ qemu-system-aarch64 -machine virt -nographic -cpu cortex-a57 -bios image.bin
+
Note that for some odd reason qemu-system-aarch64 needs to be explicitly
told to use a 64-bit CPU or it will boot in 32-bit mode. The -nographic argument
ensures that output appears on the terminal. Use Ctrl-A X to quit.
@@ -215,11 +224,39 @@ devicetree is passed via standard passage::
$ ./scripts/build-qemu.sh -a arm -rsxw
Running qemu-system-arm -machine virt -accel tcg -display none -serial mon:stdio
- U-Boot SPL 2025.04-01115-g0b14f5ab2aa1 (Apr 17 2025 - 09:39:51 -0600)
+ U-Boot SPL 2025.04-01115-g0b14f5ab2aa1 (Apr 17 2025 - 06:39:51 -0600)
+ Trying to boot from QEMU
+
+
+ U-Boot 2025.04-01115-g0b14f5ab2aa1 (Apr 17 2025 - 06:39:51 -0600)
+
+ DRAM: 128 MiB
+ using memory 0x466aa000-0x476ea000 for malloc()
+ Core: 48 devices, 12 uclasses, devicetree: passage
+ Flash: 64 MiB
+ Loading Environment from Flash... *** Warning - bad CRC, using default environment
+
+ In: serial,usbkbd
+ Out: serial,vidconsole
+ Err: serial,vidconsole
+ No USB controllers found
+ Net: No ethernet found.
+
+ starting USB...
+ No USB controllers found
+ Hit any key to stop autoboot: 0
+ =>
+
+The aarch64 build is similar::
+
+ $ ./scripts/build-qemu.sh -a arm -rsxw
+ Running qemu-system-arm -machine virt -accel tcg -display none -serial mon:stdio
+
+ U-Boot SPL 2025.04-01115-g38a16f456571 (Apr 17 2025 - 06:43:50 -0600)
Trying to boot from QEMU
- U-Boot 2025.04-01115-g0b14f5ab2aa1 (Apr 17 2025 - 09:39:51 -0600)
+ U-Boot 2025.04-01115-g38a16f456571 (Apr 17 2025 - 06:43:50 -0600)
DRAM: 128 MiB
using memory 0x466aa000-0x476ea000 for malloc()
diff --git a/scripts/build-qemu.sh b/scripts/build-qemu.sh
index 678116d1cc7..c23e50e91a6 100755
--- a/scripts/build-qemu.sh
+++ b/scripts/build-qemu.sh
@@ -178,7 +178,11 @@ arm)
extra+=" -machine virt -accel tcg"
suffix="arm"
if [[ "${bitness}" == "64" ]]; then
- BOARD="qemu_arm64"
+ if [ -n "${xpl}" ]; then
+ BOARD="qemu_arm64_spl"
+ else
+ BOARD="qemu_arm64"
+ fi
qemu=qemu-system-aarch64
extra+=" -cpu cortex-a57"
suffix="arm64"
--
2.43.0
More information about the U-Boot
mailing list