[PATCH 01/10] ARM: stm32: Add STM32MP13xx SPL Kconfig options

[Marek Vasut]

Introduce Kconfig options used by SPL on STM32MP13xx and isolate
the Kconfig options only used in case TFA BL2 is used as a SPL
behind CONFIG_TFABOOT dependency.

Signed-off-by: Marek Vasut <marek.vasut at mailbox.org>
---
Cc: Cheick Traore <cheick.traore at foss.st.com>
Cc: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
Cc: Gatien Chevallier <gatien.chevallier at foss.st.com>
Cc: Lionel Debieve <lionel.debieve at foss.st.com>
Cc: Pascal Zimmermann <pzimmermann at dh-electronics.com>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Sughosh Ganu <sughosh.ganu at linaro.org>
Cc: Tom Rini <trini at konsulko.com>
Cc: u-boot at dh-electronics.com
Cc: u-boot at lists.denx.de
Cc: uboot-stm32 at st-md-mailman.stormreply.com
---
 arch/arm/mach-stm32mp/Kconfig     | 7 +++++--
 arch/arm/mach-stm32mp/Kconfig.13x | 3 ++-
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 58250901101..3a0ca50e9d6 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -40,16 +40,19 @@ choice
 config STM32MP13X
 	bool "Support STMicroelectronics STM32MP13x Soc"
 	select ARCH_EARLY_INIT_R
-	select ARM_SMCCC
+	select ARM_SMCCC if TFABOOT
+	select ARCH_SUPPORT_PSCI if !TFABOOT
+	select BINMAN if !TFABOOT
 	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
-	select OF_BOARD
+	select OF_BOARD if TFABOOT
 	select OF_BOARD_SETUP
 	select PINCTRL_STM32
 	select STM32_RCC
 	select STM32_RESET
 	select STM32_SERIAL
+	select SUPPORT_SPL if !TFABOOT
 	select SYS_ARCH_TIMER
 	imply CMD_NVEDIT_INFO
 	imply OF_UPSTREAM
diff --git a/arch/arm/mach-stm32mp/Kconfig.13x b/arch/arm/mach-stm32mp/Kconfig.13x
index bc8b3f8cf77..cecf9e3b8c7 100644
--- a/arch/arm/mach-stm32mp/Kconfig.13x
+++ b/arch/arm/mach-stm32mp/Kconfig.13x
@@ -20,7 +20,8 @@ config TARGET_ST_STM32MP13X
 endchoice
 
 config TEXT_BASE
-	default 0xC0000000
+	default 0xC0000000 if TFABOOT
+	default 0xC0100000 if !TFABOOT
 
 config PRE_CON_BUF_ADDR
 	default 0xC0800000
-- 
2.47.2