[PATCH 1/3] arm: dts: k3-*-r5: Remove clocks from mcu_timer0
Francesco Dolcini
francesco at dolcini.it
Thu May 15 12:18:59 CEST 2025
Hello Manorit,
On Thu, Nov 21, 2024 at 05:32:51PM +0530, Manorit Chawdhry wrote:
> Updated PLL driver sequencing requires us to use udelay in the PLL
> driver as there is no poll bit to get the status of operations.
> tick-timer(mcu_timer0/main_timer0) setting up the clocks for itself is
> something that won't work as the PLL driver will be using udelay and
> PLLs are configured during clock probe which would end up in a recursive
> probe.
>
> tick-timer being used by K3 devices are configured by ROM and we really
> don't need to configure any of the clocks.
>
> Remove the clock dependency from R5 stage as we don't need to setup
> clocks for it.
>
> Signed-off-by: Manorit Chawdhry <m-chawdhry at ti.com>
> ---
> arch/arm/dts/k3-am62-lp-sk-u-boot.dtsi | 10 ----------
> arch/arm/dts/k3-am62-r5-lp-sk.dts | 9 +++++++++
> arch/arm/dts/k3-am625-r5-sk.dts | 9 +++++++++
> arch/arm/dts/k3-am625-sk-u-boot.dtsi | 10 ----------
> arch/arm/dts/k3-am62a7-r5-sk.dts | 10 ++++++++++
> arch/arm/dts/k3-am62a7-sk-u-boot.dtsi | 5 -----
> arch/arm/dts/k3-am62p5-r5-sk.dts | 8 ++++++++
> arch/arm/dts/k3-j7200-r5-common-proc-board.dts | 4 ++++
> arch/arm/dts/k3-j721e-r5.dtsi | 6 +++++-
> arch/arm/dts/k3-j721s2-r5.dtsi | 4 ++++
> arch/arm/dts/k3-j722s-r5-evm.dts | 8 ++++++++
> arch/arm/dts/k3-j784s4-r5.dtsi | 5 ++++-
> 12 files changed, 61 insertions(+), 27 deletions(-)
This change should have been done to any board using any of those SoC,
correct? verdin-am62 was not changed, for example.
Francesco
More information about the U-Boot
mailing list