[PATCH v3 0/5] Restore imx8mn_bsh_smm_s2 properly booting

[Dario Binacchi]

Commits [1] and [2] broke the booting of the BSH SMM S2 board. The
patches in this series restore proper booting.

[1] 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
[2] dda454e933c6 ("serial: mxc: Support bulk enabling clocks")

Changes in v3:
- Drop patch 4/4 "serial: mxc: restore booting for imx8mn_bsh_smm_s2"
- Add patch 4/5 "board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge
  CONFIG_SPL_SYS_MALLOC_F_LEN"
- Add patch 5/5 "board: bsh: imx8mn_bsh_smm_s2/s2pro: let clock system
  enable UART clock"

Dario Binacchi (5):
  spl: Kconfig: support U-Boot load from raw NAND
  imx: spl_imx_romapi: support raw NAND sector
  configs: imx8mn_bsh_smm_s2: load U-Boot from raw NAND
  board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge
    CONFIG_SPL_SYS_MALLOC_F_LEN
  board: bsh: imx8mn_bsh_smm_s2/s2pro: let clock system enable UART
    clock

 arch/arm/mach-imx/spl_imx_romapi.c     |  8 +++-----
 board/bsh/imx8mn_smm_s2/spl.c          |  2 --
 common/spl/Kconfig                     | 15 +++++++++++++++
 configs/imx8mn_bsh_smm_s2_defconfig    |  3 ++-
 configs/imx8mn_bsh_smm_s2pro_defconfig |  1 -
 5 files changed, 20 insertions(+), 9 deletions(-)

-- 
2.43.0

base-commit: eeb5ff1a468b2303efa9deb2483b5edbebb568c6
branch: bsh-s2-break