[PATCH v3 3/5] configs: imx8mn_bsh_smm_s2: load U-Boot from raw NAND

Dario Binacchi dario.binacchi at amarulasolutions.com
Tue May 20 10:54:18 CEST 2025


Commit 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options") breaks
the boot of the BSH SMM S2 board. Add options to load U-Boot from raw NAND
sector.

Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>

---

(no changes since v2)

Changes in v2:
- Drop CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR.
- Add CONFIG_SPL_NAND_RAW_U_BOOT_USE_SECTOR and
  CONFIG_SPL_NAND_RAW_U_BOOT_SECTOR options.

 configs/imx8mn_bsh_smm_s2_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
index 9ffcd3b221c3..1c11d4705419 100644
--- a/configs/imx8mn_bsh_smm_s2_defconfig
+++ b/configs/imx8mn_bsh_smm_s2_defconfig
@@ -47,6 +47,8 @@ CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MTD=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_U_BOOT_USE_SECTOR=y
+CONFIG_SPL_NAND_RAW_U_BOOT_SECTOR=0x300
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_NAND_IDENT=y
 CONFIG_SPL_POWER=y
-- 
2.43.0



More information about the U-Boot mailing list