[PATCH v3 3/4] binman: test: Ensure all config references exist in /images node

Aristo Chen jj251510319013 at gmail.com
Wed May 21 08:27:44 CEST 2025


Several binman FIT test device trees reference image nodes such as atf
and uboot in their /configurations sections, but those image nodes
were not actually defined in the /images node. This mismatch can lead
to validation errors when stricter consistency checks are introduced.

This patch adds minimal definitions for atf and uboot under the
/images node in all relevant test DTS files.

Signed-off-by: Aristo Chen <aristo.chen at canonical.com>
---
 tools/binman/test/170_fit_fdt.dts              | 14 ++++++++++++++
 tools/binman/test/220_fit_subentry_bintool.dts |  2 +-
 tools/binman/test/223_fit_fdt_oper.dts         | 14 ++++++++++++++
 tools/binman/test/284_fit_fdt_list.dts         | 14 ++++++++++++++
 tools/binman/test/333_fit_fdt_dir.dts          | 14 ++++++++++++++
 tools/binman/test/334_fit_fdt_compat.dts       | 14 ++++++++++++++
 tools/binman/test/335_fit_fdt_phase.dts        | 14 ++++++++++++++
 tools/binman/test/345_fit_fdt_name.dts         | 14 ++++++++++++++
 8 files changed, 99 insertions(+), 1 deletion(-)

diff --git a/tools/binman/test/170_fit_fdt.dts b/tools/binman/test/170_fit_fdt.dts
index 0197ffd1597..4b1e9b41ec0 100644
--- a/tools/binman/test/170_fit_fdt.dts
+++ b/tools/binman/test/170_fit_fdt.dts
@@ -15,6 +15,20 @@
 			fit,fdt-list = "of-list";
 
 			images {
+				atf {
+					description = "atf firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
+				uboot {
+					description = "U-Boot firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
 				kernel {
 					description = "Vanilla Linux kernel";
 					type = "kernel";
diff --git a/tools/binman/test/220_fit_subentry_bintool.dts b/tools/binman/test/220_fit_subentry_bintool.dts
index 6e29d41eeb3..b1d8fb0feae 100644
--- a/tools/binman/test/220_fit_subentry_bintool.dts
+++ b/tools/binman/test/220_fit_subentry_bintool.dts
@@ -12,7 +12,7 @@
 			#address-cells = <1>;
 
 			images {
-				test {
+				kernel {
 					description = "Something using a bintool";
 					type = "kernel";
 					arch = "arm";
diff --git a/tools/binman/test/223_fit_fdt_oper.dts b/tools/binman/test/223_fit_fdt_oper.dts
index e630165acf4..cb3b31e36f6 100644
--- a/tools/binman/test/223_fit_fdt_oper.dts
+++ b/tools/binman/test/223_fit_fdt_oper.dts
@@ -15,6 +15,20 @@
 			fit,fdt-list = "of-list";
 
 			images {
+				atf {
+					description = "atf firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
+				uboot {
+					description = "U-Boot firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
 				kernel {
 					description = "Vanilla Linux kernel";
 					type = "kernel";
diff --git a/tools/binman/test/284_fit_fdt_list.dts b/tools/binman/test/284_fit_fdt_list.dts
index 8885313f5b8..70cdb326708 100644
--- a/tools/binman/test/284_fit_fdt_list.dts
+++ b/tools/binman/test/284_fit_fdt_list.dts
@@ -15,6 +15,20 @@
 			fit,fdt-list-val = "test-fdt1", "test-fdt2";
 
 			images {
+				atf {
+					description = "atf firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
+				uboot {
+					description = "U-Boot firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
 				kernel {
 					description = "Vanilla Linux kernel";
 					type = "kernel";
diff --git a/tools/binman/test/333_fit_fdt_dir.dts b/tools/binman/test/333_fit_fdt_dir.dts
index aa778451a4b..71971de4232 100644
--- a/tools/binman/test/333_fit_fdt_dir.dts
+++ b/tools/binman/test/333_fit_fdt_dir.dts
@@ -15,6 +15,20 @@
 			fit,fdt-list-dir = "fdts";
 
 			images {
+				atf {
+					description = "atf firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
+				uboot {
+					description = "U-Boot firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
 				kernel {
 					description = "Vanilla Linux kernel";
 					type = "kernel";
diff --git a/tools/binman/test/334_fit_fdt_compat.dts b/tools/binman/test/334_fit_fdt_compat.dts
index 3bf45c710db..bf1b5a4a94a 100644
--- a/tools/binman/test/334_fit_fdt_compat.dts
+++ b/tools/binman/test/334_fit_fdt_compat.dts
@@ -15,6 +15,20 @@
 			fit,fdt-list = "of-list";
 
 			images {
+				atf {
+					description = "atf firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
+				uboot {
+					description = "U-Boot firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
 				kernel {
 					description = "Vanilla Linux kernel";
 					type = "kernel";
diff --git a/tools/binman/test/335_fit_fdt_phase.dts b/tools/binman/test/335_fit_fdt_phase.dts
index f8d0740a394..c20bcad651a 100644
--- a/tools/binman/test/335_fit_fdt_phase.dts
+++ b/tools/binman/test/335_fit_fdt_phase.dts
@@ -15,6 +15,20 @@
 			fit,fdt-list = "of-list";
 
 			images {
+				atf {
+					description = "atf firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
+				uboot {
+					description = "U-Boot firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
 				kernel {
 					description = "Vanilla Linux kernel";
 					type = "kernel";
diff --git a/tools/binman/test/345_fit_fdt_name.dts b/tools/binman/test/345_fit_fdt_name.dts
index 631a8e5f59b..0ef2e1934a0 100644
--- a/tools/binman/test/345_fit_fdt_name.dts
+++ b/tools/binman/test/345_fit_fdt_name.dts
@@ -15,6 +15,20 @@
 			fit,fdt-list = "of-list";
 
 			images {
+				atf {
+					description = "atf firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
+				uboot {
+					description = "U-Boot firmware";
+					type = "firmware";
+					compression = "none";
+					load = <00000000>;
+					entry = <00000000>;
+				};
 				kernel {
 					description = "Vanilla Linux kernel";
 					type = "kernel";
-- 
2.43.0



More information about the U-Boot mailing list