[PATCH v1 0/4] Add SD card support to the Beagle-V-Fire

[Robert Nelson]

On Thu, May 22, 2025 at 9:48 AM <Conor.Dooley at microchip.com> wrote:
>
> On 22/05/2025 15:09, Eoin Dickson wrote:
> > From: Eoin Dickson <eoin.dickson at microchip.com>
> >
> > This series add SD card support for the Beagle-V-Fire. The Beagle-V-Fire uses the
> > Microchip coreqspi xfer function and a gpio chip select, so this series adds gpio
> > support for PolarFire SoC and the xfer function into the Microchip coreqspi driver.
> >
> > Eoin Dickson (4):
> >    gpio: add PolarFire SoC GPIO and Core GPIO driver
> >    spi: coreqspi: add xfer function for PolarFire SoC
>
> >    configs: beaglev_fire: Enable GPIO and MMC_SPI
> >    riscv: dts: microchip: enable gpio banks in Beagle-V Fire
>
> I think what you need/want gpio wise is already in dts/upstream/
> but the config you're citing here doesn't exist in upstream
> yet, so in v2 either drop the beagle-v specific bits and just
> include the driver stuff or else bring the whole beaglev support
> along. The former might be a better option, since the platform
> support portion probably needs a wee chat with the TI folks
> about whther it goes with the "real" TI beagles or not.

What's easier for you guys? Sticking it under ./board/beagle/ in
u-boot would be the way to go.. The TH1520 Beagle will also eventually
be there..

Regards,

-- 
Robert Nelson
https://rcn-ee.com/