[PATCH 11/13] board: venice: update model representation for venice-flex
Tim Harvey
tharvey at gateworks.com
Fri May 23 19:20:16 CEST 2025
Update the model string representation for the Venice-Flex product
family (GW8xxx).
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
board/gateworks/venice/eeprom.c | 104 +++++++++++++++++++++++++++++++-
1 file changed, 102 insertions(+), 2 deletions(-)
diff --git a/board/gateworks/venice/eeprom.c b/board/gateworks/venice/eeprom.c
index 49b1ad34b148..702ab392a047 100644
--- a/board/gateworks/venice/eeprom.c
+++ b/board/gateworks/venice/eeprom.c
@@ -6,6 +6,7 @@
#include <gsc.h>
#include <hexdump.h>
#include <i2c.h>
+#include <dm/device.h>
#include <dm/uclass.h>
#include "eeprom.h"
@@ -19,7 +20,7 @@
struct venice_board_info som_info;
struct venice_board_info base_info;
-char venice_model[32];
+char venice_model[64];
char venice_som_model[32];
char venice_baseboard_model[32];
u32 venice_serial;
@@ -109,7 +110,7 @@ static int eeprom_read(int busno, int slave, int alen, struct venice_board_info
/* validate checksum */
for (chksum = 0, i = 0; i < (int)sizeof(*info) - 2; i++)
chksum += buf[i];
- if ((info->chksum[0] != chksum >> 8) ||
+ if ((info->chksum[0] != ((chksum >> 8) & 0xff)) ||
(info->chksum[1] != (chksum & 0xff))) {
printf("EEPROM: I2C%d at 0x%02x: Invalid Checksum\n", busno, slave);
print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info));
@@ -128,6 +129,54 @@ static int eeprom_read(int busno, int slave, int alen, struct venice_board_info
return 0;
}
+static int fsa_eeprom_read(const char *base, int fsa, struct fsa_board_info *info)
+{
+ int i;
+ int chksum;
+ unsigned char *buf = (unsigned char *)info;
+ struct udevice *dev, *bus;
+ int ret;
+ u8 reg;
+
+ /* probe mux */
+ ret = uclass_get_device_by_seq(UCLASS_I2C, 2, &bus);
+ if (!ret)
+ ret = dm_i2c_probe(bus, 0x70, 0, &dev);
+ if (ret)
+ return ret;
+ /* steer mux */
+ if (!strncmp(base, "GW82", 4)) {
+ if (fsa < 3)
+ reg = (fsa == 1) ? BIT(1) : BIT(0);
+ else
+ return -EINVAL;
+ }
+ dm_i2c_write(dev, 0x00, ®, 1);
+
+ /* get eeprom */
+ ret = dm_i2c_probe(bus, 0x54, 0, &dev);
+ if (ret)
+ return ret;
+
+ /* read eeprom config section */
+ ret = dm_i2c_read(dev, 0x00, buf, sizeof(*info));
+ if (ret)
+ return ret;
+
+ /* validate checksum */
+ for (chksum = 0, i = 0; i < (int)sizeof(*info) - 2; i++)
+ chksum += buf[i];
+ if ((info->chksum[0] != ((chksum >> 8) & 0xff)) ||
+ (info->chksum[1] != (chksum & 0xff))) {
+ printf("FSA%d EEPROM (board): %s: Invalid Checksum\n", fsa, dev->name);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, sizeof(*info));
+ memset(info, 0, sizeof(*info));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/* determine BOM revision from model */
int get_bom_rev(const char *str)
{
@@ -352,6 +401,57 @@ int venice_eeprom_init(int quiet)
}
venice_serial = som_info.serial;
+ /* GW8xxx product family naming scheme */
+ if (venice_model[2] == '8') {
+ struct fsa_board_info fsa_info;
+ int i = 0;
+ int fsa;
+
+ /* baseboard */
+ if (base_info.model[0]) {
+ rev_pcb = get_pcb_rev(base_info.model);
+ rev_bom = get_bom_rev(base_info.model);
+ venice_model[i++] = 'G';
+ venice_model[i++] = 'W';
+ venice_model[i++] = base_info.model[2]; /* baseboard */
+ venice_model[i++] = base_info.model[3];
+ venice_model[i++] = base_info.model[4]; /* subload */
+ venice_model[i++] = base_info.model[5];
+ venice_model[i++] = rev_pcb;
+ if (rev_bom)
+ venice_model[i++] = rev_bom;
+ venice_model[i++] = '-';
+ venice_model[i++] = 'S';
+ } else {
+ venice_model[i++] = 'G';
+ venice_model[i++] = 'W';
+ }
+
+ /* som */
+ rev_pcb = get_pcb_rev(som_info.model);
+ rev_bom = get_bom_rev(som_info.model);
+ venice_model[i++] = som_info.model[4];
+ venice_model[i++] = som_info.model[5];
+ venice_model[i++] = rev_pcb;
+ if (rev_bom)
+ venice_model[i++] = rev_bom;
+
+ /* fsa */
+ for (fsa = 1; fsa < FSA_MAX; fsa++) {
+ if (!fsa_eeprom_read(venice_model, fsa, &fsa_info)) {
+ venice_model[i++] = '-';
+ venice_model[i++] = 'F';
+ venice_model[i++] = '0' + fsa;
+ venice_model[i++] = fsa_info.model[5];
+ venice_model[i++] = fsa_info.model[6];
+ venice_model[i++] = fsa_info.model[8];
+ if (fsa_info.model[9])
+ venice_model[i++] = fsa_info.model[9];
+ }
+ }
+ venice_model[i++] = 0;
+ }
+
if (!quiet)
eeprom_info(false);
--
2.25.1
More information about the U-Boot
mailing list