[PATCH v4 20/25] rockchip: Set the skip-at-start property correctly

Simon Glass sjg at chromium.org
Sun May 25 12:47:56 CEST 2025


The rockchip image is written to the media at block 64, which is a 32K
offset, so set the skip-at-start property to 0x8000

Update CONFIG_SPL_PAD_TO to point to the offset in the image, since
Binman is dealing with the 'missing' 32K now.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v2)

Changes in v2:
- Move this patch to the end of the series
- Drop 0x8000 offset for SPI

 arch/arm/dts/rockchip-u-boot.dtsi | 1 +
 common/spl/Kconfig                | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
index 905706c68e7..8da3c1c2a98 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -170,6 +170,7 @@
 	simple-bin {
 		filename = "u-boot-rockchip.bin";
 		pad-byte = <0xff>;
+		skip-at-start = <0x8000>;
 
 #ifndef CONFIG_VPL
 		mkimage {
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index fb6c90733ee..fa28c18fa48 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -96,7 +96,7 @@ config SPL_MAX_SIZE
 
 config SPL_PAD_TO
 	hex "Offset to which the SPL should be padded before appending the SPL payload"
-	default 0x7f8000 if ARCH_ROCKCHIP
+	default 0x800000 if ARCH_ROCKCHIP
 	default 0x31000 if ARCH_MX6 && MX6_OCRAM_256KB
 	default 0x11000 if ARCH_MX7 || (ARCH_MX6 && !MX6_OCRAM_256KB)
 	default 0x10000 if ARCH_KEYSTONE
-- 
2.34.1



More information about the U-Boot mailing list