[PATCH v2 0/3] bootcount: Small clean-up and fix, and dm_i2c single-word support

[niko.mauno at vaisala.com]

From: Niko Mauno <niko.mauno at vaisala.com>

In this series, we first introduce a clean-up where we switch to use
predefined bit masks instead of hard-coded values for count and magic
halves in the single-word (32-bit) boot count scheme.

Then we fix a case of missing boot count value masking in single-word
scenario in bootcount.c, which allowed clobbering of the magic half
when storing the value. With this change the clobbering preventing
behavior becomes consistent with existing single word bootcount storing
implementations in bootcount_at91.c and bootcount_davinci.c.

Finally, we enable the DM I2C bootcount driver to work also in single
word (4 byte) mode, in addition to the pre-existing half-word (2 byte)
mode. By default the driver still operates in half word mode as so far,
but can now be used alternatively in single word mode by adding
'size = <0x4>;' in the associated device tree node.

Signed-off-by: Niko Mauno <niko.mauno at vaisala.com>
--
Niko Mauno (3):
  bootcount: Use predefined count/magic bit masks
  bootcount: Fix potential clobbering issue
  bootcount: dm_i2c: Support also single word mode

 drivers/bootcount/bootcount.c         | 14 ++---
 drivers/bootcount/bootcount_at91.c    |  7 +--
 drivers/bootcount/bootcount_davinci.c |  6 +--
 drivers/bootcount/bootcount_dm_i2c.c  | 74 +++++++++++++++++++--------
 include/bootcount.h                   |  5 ++
 5 files changed, 74 insertions(+), 32 deletions(-)

-- 
2.47.3