[PATCH v1 11/12] arm: dts: Add U-Boot device tree for i.MX952 EVK
alice.guo at oss.nxp.com
alice.guo at oss.nxp.com
Thu Feb 5 14:55:17 CET 2026
From: Alice Guo <alice.guo at nxp.com>
Add U-Boot specific device tree configuration for i.MX952 EVK board.
Signed-off-by: Alice Guo <alice.guo at nxp.com>
---
arch/arm/dts/imx952-evk-u-boot.dtsi | 58 +++++++
arch/arm/dts/imx952-u-boot.dtsi | 327 ++++++++++++++++++++++++++++++++++++
2 files changed, 385 insertions(+)
diff --git a/arch/arm/dts/imx952-evk-u-boot.dtsi b/arch/arm/dts/imx952-evk-u-boot.dtsi
new file mode 100644
index 00000000000..1b2c314a41b
--- /dev/null
+++ b/arch/arm/dts/imx952-evk-u-boot.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2026 NXP
+ */
+
+#include "imx952-u-boot.dtsi"
+
+&i2c3_pcal6408 {
+ compatible = "ti,tca6408";
+ label = "i2c3_io";
+};
+
+&i2c4_pcal6408 {
+ compatible = "ti,tca6408";
+ label = "i2c4_io";
+};
+
+&pcal6416 {
+ compatible = "ti,tca6416";
+ label = "i2c6_io";
+};
+
+&pcal6524 {
+ label = "i2c7_io";
+};
+
+&usb1 {
+ compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+ /delete-property/power-domains;
+ bootph-pre-ram;
+ extcon = <&ptn5110>;
+};
+
+&usb2 {
+ compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+ /delete-property/power-domains;
+ bootph-pre-ram;
+};
+
+&usbmisc1 {
+ bootph-pre-ram;
+};
+
+&usbmisc2 {
+ bootph-pre-ram;
+};
+
+&usbphynop1 {
+ bootph-pre-ram;
+};
+
+&usbphynop2 {
+ bootph-pre-ram;
+};
+
+&wdog3 {
+ status = "disabled";
+};
diff --git a/arch/arm/dts/imx952-u-boot.dtsi b/arch/arm/dts/imx952-u-boot.dtsi
new file mode 100644
index 00000000000..208931ba884
--- /dev/null
+++ b/arch/arm/dts/imx952-u-boot.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2026 NXP
+ */
+
+/ {
+ binman {
+ multiple-images;
+
+ m33-oei-ddrfw {
+ pad-byte = <0x00>;
+ align-size = <0x8>;
+ filename = "m33-oei-ddrfw.bin";
+
+ oei-m33-ddr {
+ align-size = <0x4>;
+ filename = "oei-m33-ddr.bin";
+ type = "blob-ext";
+ };
+
+ imx-lpddr {
+ type = "nxp-header-ddrfw";
+
+ imx-lpddr-imem {
+ filename = "lpddr4x_imem_v202409.bin";
+ type = "blob-ext";
+ };
+
+ imx-lpddr-dmem {
+ filename = "lpddr4x_dmem_v202409.bin";
+ type = "blob-ext";
+ };
+ };
+
+ imx-lpddr-qb {
+ type = "nxp-header-ddrfw";
+
+ imx-lpddr-imem-qb {
+ filename = "lpddr4x_imem_qb_v202409.bin";
+ type = "blob-ext";
+ };
+
+ imx-lpddr-dmem-qb {
+ filename = "lpddr4x_dmem_qb_v202409.bin";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ type = "nxp-imx9image";
+ cfg-path = "spl/u-boot-spl.cfgout";
+ args;
+
+ cntr-version = <2>;
+ boot-from = "sd";
+ soc-type = "IMX9";
+ append = "mx952a0-ahab-container.img";
+ container;
+ dummy-ddr;
+ image0 = "oei", "m33-oei-ddrfw.bin", "0x1ffc0000";
+ hold = <0x10000>;
+ image1 = "m33", "m33_image.bin", "0x1ffc0000";
+ image2 = "a55", "spl/u-boot-spl.bin", "0x20480000";
+ dummy-v2x = <0x8b000000>;
+ };
+
+ u-boot {
+ type = "nxp-imx9image";
+ cfg-path = "u-boot-container.cfgout";
+ args;
+
+ cntr-version = <2>;
+ boot-from = "sd";
+ soc-type = "IMX9";
+ container;
+ image0 = "a55", "bl31.bin", "0x8a200000";
+ image1 = "a55", "u-boot.bin", "0x90200000";
+ };
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyLP0,115200 earlycon";
+ };
+
+ aliases {
+ usb_gadget0 = &usbg1;
+ usb_gadget1 = &usbg2;
+ };
+
+ usbg1: usbg1 {
+ compatible = "fsl,imx27-usb-gadget";
+ dr_mode = "peripheral";
+ chipidea,usb = <&usb1>;
+ bootph-pre-ram;
+ status = "okay";
+ };
+
+ usbg2: usbg2 {
+ compatible = "fsl,imx27-usb-gadget";
+ dr_mode = "peripheral";
+ chipidea,usb = <&usb2>;
+ bootph-pre-ram;
+ status = "okay";
+ };
+
+ reg_m2_pwr: regulator-m2-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "M.2-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ /*
+ * M.2 device only can be enabled(W_DISABLE1#) after all Power
+ * Rails reach their minimum operating voltage (PCI Express M.2
+ * Specification r5.1 3.1.4 Power-up Timing).
+ * Set a delay equal to the max value of Tsettle here.
+ */
+ startup-delay-us = <5000>;
+ };
+};
+
+&A55_0 {
+ clocks = <&scmi_clk IMX952_CLK_ARMPLL_PFD0>;
+ /delete-property/ power-domains;
+};
+
+&A55_1 {
+ clocks = <&scmi_clk IMX952_CLK_ARMPLL_PFD0>;
+ /delete-property/ power-domains;
+};
+
+&A55_2 {
+ clocks = <&scmi_clk IMX952_CLK_ARMPLL_PFD0>;
+ /delete-property/ power-domains;
+};
+
+&A55_3 {
+ clocks = <&scmi_clk IMX952_CLK_ARMPLL_PFD0>;
+ /delete-property/ power-domains;
+};
+
+&aips1 {
+ bootph-all;
+};
+
+&aips2 {
+ bootph-all;
+};
+
+&aips3 {
+ bootph-all;
+};
+
+&clk_ext1 {
+ bootph-all;
+};
+
+&clk_dummy {
+ bootph-all;
+};
+
+&clk_osc_24m {
+ bootph-all;
+};
+
+&elemu1 {
+ status = "okay";
+ bootph-all;
+};
+
+&elemu3 {
+ status = "okay";
+ bootph-all;
+};
+
+&{/firmware} {
+ bootph-all;
+};
+
+&{/firmware/scmi} {
+ bootph-all;
+};
+
+&{/firmware/scmi/protocol at 11} {
+ bootph-all;
+};
+
+&{/firmware/scmi/protocol at 13} {
+ bootph-all;
+};
+
+&{/firmware/scmi/protocol at 14} {
+ bootph-all;
+};
+
+&{/firmware/scmi/protocol at 15} {
+ bootph-all;
+};
+
+&{/firmware/scmi/protocol at 19} {
+ bootph-all;
+};
+
+&gpio1 {
+ reg = <0 0x47400000 0 0x1000>, <0 0x47400040 0 0x40>;
+};
+
+&gpio2 {
+ reg = <0 0x43810000 0 0x1000>, <0 0x43810040 0 0x40>;
+ bootph-pre-ram;
+ /*
+ * Use one SPL/U-Boot for mx952evk and mx952evkrpmsg, since GPIO2
+ * is assigned to M7, disable gpio2 here
+ */
+ status = "disabled";
+};
+
+&gpio3 {
+ reg = <0 0x43820000 0 0x1000>, <0 0x43820040 0 0x40>;
+ bootph-pre-ram;
+};
+
+&gpio4 {
+ reg = <0 0x43840000 0 0x1000>, <0 0x43840040 0 0x40>;
+ bootph-pre-ram;
+};
+
+&gpio5 {
+ reg = <0 0x43850000 0 0x1000>, <0 0x43850040 0 0x40>;
+ bootph-pre-ram;
+};
+
+&lpuart1 {
+ bootph-pre-ram;
+};
+
+&mu2 {
+ bootph-all;
+};
+
+®_usdhc2_vmmc {
+ bootph-pre-ram;
+};
+
+&scmi_buf0 {
+ reg = <0x0 0x400>;
+ bootph-all;
+};
+
+&scmi_buf1 {
+ bootph-all;
+};
+
+&{/soc} {
+ bootph-all;
+};
+
+&sram0 {
+ bootph-all;
+};
+
+&usdhc1 {
+ bootph-pre-ram;
+};
+
+&usdhc2 {
+ bootph-pre-ram;
+};
+
+&scmi_iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ bootph-pre-ram;
+
+ fsl,pins = <
+ IMX952_PAD_XSPI1_SS1_B__WAKEUPMIX_TOP_GPIO5_IO_11 0x3fe
+ IMX952_PAD_GPIO_IO12__WAKEUPMIX_TOP_TPM3_CH2 0x51e
+ IMX952_PAD_CCM_CLKO1__WAKEUPMIX_TOP_GPIO3_IO_26 0x3fe
+ IMX952_PAD_CCM_CLKO2__WAKEUPMIX_TOP_GPIO3_IO_27 0x3fe
+ >;
+ };
+};
+
+&pinctrl_uart1 {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc1 {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc1_100mhz {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc1_200mhz {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc2 {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc2_100mhz {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc2_200mhz {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc2_gpio {
+ bootph-pre-ram;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+ bootph-pre-ram;
+};
--
2.43.0
More information about the U-Boot
mailing list