[PATCH v2 2/2] qcom_defconfig: Disable CONFIG_EFI_PSCI_RESET_RUNTIME

[Aswin Murugan]

On 1/14/2026 7:42 PM, Casey Connolly wrote:
>
> On 14/01/2026 12:16, Aswin Murugan wrote:
>> Disable CONFIG_EFI_PSCI_RESET_RUNTIME in qcom_defconfig to let the kernel
>> manage reset modes and handle specialized reboot requests correctly.
> Please disable this in kconfig instead. Could you validate that this
> doesn't cause issues on an older platform like sdm845?
>
> Kind regards,>

Thanks for the feedback.
In v1 of this patch, Tom requested that the option be enabled by default 
in Kconfig so that existing behavior on other platforms would not be 
affected [1]. Based on that guidance, in v2 enabled the new config by 
default in Kconfig and explicitly disabled it for Qualcomm in 
|qcom_defconfig|.

Regarding validation on sdm845: I currently don’t have access to sdm845 
hardware, so I’m unable to test it directly. From the nature of the 
change, it shouldn’t impact older Qualcomm platforms, as the reset path 
is typically managed by the OS/bootloader independently.

I will address the remaining comments and respin the patch.

[1] https://lore.kernel.org/all/20260108143742.GT3416603@bill-the-cat

Thanks,
Aswin

>> Signed-off-by: Aswin Murugan <aswin.murugan at oss.qualcomm.com>
>> ---
>>   configs/qcom_defconfig | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
>> index a210f4dc5e6..0bd87b1f5a1 100644
>> --- a/configs/qcom_defconfig
>> +++ b/configs/qcom_defconfig
>> @@ -6,6 +6,7 @@ CONFIG_ARCH_SNAPDRAGON=y
>>   CONFIG_NR_DRAM_BANKS=24
>>   CONFIG_DEFAULT_DEVICE_TREE="qcom/sdm845-db845c"
>>   CONFIG_SYS_LOAD_ADDR=0xA0000000
>> +CONFIG_EFI_PSCI_RESET_RUNTIME=n
>>   CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
>>   CONFIG_EFI_CAPSULE_ON_DISK=y
>>   CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y