[PATCH v1 0/9] Add support for StarFive VisionFive 2 Lite board

[Hal Feng]

> On 10.02.26 03:11, E Shattow wrote:
> Hi Leo, Hal, Tom, and Heinrich, et.al
> 
> On 2/9/26 03:21, Leo Liang wrote:
> > On Fri, Oct 24, 2025 at 04:59:23PM +0800, Hal Feng wrote:
> >> VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S
> >> industrial SoC which can run at -40~85 degrees centigrade and up to
> 1.25GHz.
> >>
> >> Board features:
> >> - JH7110S SoC
> >> - 4/8 GiB LPDDR4 DRAM
> >> - AXP15060 PMIC
> >> - 40 pin GPIO header
> >> - 1x USB 3.0 host port
> >> - 3x USB 2.0 host port
> >> - 1x M.2 M-Key (size: 2242)
> >> - 1x MicroSD slot (optional non-removable 64GiB eMMC)
> >> - 1x QSPI Flash
> >> - 1x I2C EEPROM
> >> - 1x 1Gbps Ethernet port
> >> - SDIO-based Wi-Fi & UART-based Bluetooth
> >> - 1x HDMI port
> >> - 1x 2-lane DSI
> >> - 1x 2-lane CSI
> >>
> >> VisionFive 2 Lite schematics:
> >> https://doc-
> en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_2025
> >> 0818_SCH.pdf VisionFive 2 Lite Quick Start Guide:
> >> https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.h
> >> tml More documents:
> >> https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html
> >>
> >> Note: Patch 1 and 2 are the kernel device tree picked from [1]. They
> >> are just for test and please ignore them because dts/upstream should
> >> be synced with devicetree-rebasing.
> >>
> >> [1]
> >> https://lore.kernel.org/all/20250821100930.71404-1-hal.feng@starfivet
> >> ech.com/
> >>
> >> Changes since RFC:
> >> - Rebase on the latest mainline.
> >> - Improve the commit messages.
> >> - Drop patch 7.
> >> patch 3, 4:
> >> - Return 0 instead of 0xFF if read_eeprom() fails.
> >> patch 5:
> >> - Keep default FORMAT_VERSION 0x2.
> >> - Change wifi_bt field to onboard_module field and use bit 0 to mark
> >>   WIFI/BT.
> >> - Drop all "no_eth0", "no_eth1" configuration.
> >>
> >> History:
> >> RFC:
> >> https://lore.kernel.org/all/20250829060931.79940-1-hal.feng@starfivet
> >> ech.com/
> >>
> >> Hal Feng (9):
> >>   riscv: dts: starfive: jh7110-common: Move out some nodes to the board
> >>     dts
> >>   riscv: dts: starfive: Add VisionFive 2 Lite board device tree
> >>   eeprom: starfive: Simplify get_ddr_size_from_eeprom()
> >>   eeprom: starfive: Correct get_pcb_revision_from_eeprom()
> >>   eeprom: starfive: Support eeprom data format v3
> >>   pcie: starfive: Add a optional power gpio support
> >>   configs: visionfive2: Add VisionFive 2 Lite DT to OF_LIST
> >>   board: starfive: spl: Support VisionFive 2 Lite
> >>   board: starfive: visionfive2: Add VisionFive 2 Lite fdt selection
> >>
> >>  arch/riscv/cpu/jh7110/spl.c                   |   2 +-
> >>  arch/riscv/include/asm/arch-jh7110/eeprom.h   |  13 +-
> >>  board/starfive/visionfive2/spl.c              |   3 +
> >>  .../visionfive2/starfive_visionfive2.c        |   2 +
> >>  .../visionfive2/visionfive2-i2c-eeprom.c      |  64 ++++---
> >>  configs/starfive_visionfive2_defconfig        |   2 +-
> >>  drivers/pci/pcie_starfive_jh7110.c            |   8 +
> >>  .../src/riscv/starfive/jh7110-common.dtsi     |  22 ---
> >>  .../jh7110-deepcomputing-fml13v01.dts         |  49 ++++++
> >>  .../src/riscv/starfive/jh7110-milkv-mars.dts  |  49 ++++++
> >>  .../riscv/starfive/jh7110-pine64-star64.dts   |  49 ++++++
> >>  .../jh7110-starfive-visionfive-2.dtsi         |  46 +++++
> >>  dts/upstream/src/riscv/starfive/jh7110.dtsi   |  16 --
> >>  .../jh7110s-starfive-visionfive-2-lite.dts    | 159 ++++++++++++++++++
> >>  14 files changed, 418 insertions(+), 66 deletions(-)  create mode
> >> 100644
> >> dts/upstream/src/riscv/starfive/jh7110s-starfive-visionfive-2-lite.dt
> >> s
> >
> > Reviewed-by: Leo Yu-Chi Liang <ycliang at andestech.com>
> 
> The series has errors as it is applied:
> 
> https://source.denx.de/u-boot/custodians/u-boot-riscv/-
> /commits/master?ref_type=HEADS
> 
> For example:
> 
> https://source.denx.de/u-boot/custodians/u-boot-riscv/-
> /commit/4ea3acc000a793d04bae90eabfdc47be31580b87
> 
> - CONFIG_OF_LIST="starfive/jh7110-deepcomputing-fml13v01
> starfive/jh7110-milkv-mars starfive/jh7110-milkv-marscm-emmc
> starfive/jh7110-milkv-marscm-lite starfive/jh7110-pine64-star64
> starfive/jh7110-starfive-visionfive-2-v1.2a
> starfive/jh7110-starfive-visionfive-2-v1.3b"
> 
> + CONFIG_OF_LIST="starfive/jh7110-deepcomputing-fml13v01
> starfive/jh7110-milkv-mars starfive/jh7110-milkv-marscm-emmc
> starfive/jh7110-milkv-marscm-lite starfive/jh7110-pine64-star64
> starfive/jh7110-starfive-visionfive-2-v1.2a
> starfive/jh7110-starfive-visionfive-2-v1.3b
> configs/starfive_visionfive2_defconfig"
> 
> The above does not agree with what I reviewed on the mailing list. I am listed
> as having reviewed the content being applied. What was applied is something
> completely different than what I reviewed!
> 
> My question:
> 
> Why are changes to the series being made when applying to the tree, who is
> making those changes, and how can we get visibility into these mistakes? My
> question is valid even if the errors are not intentional or through action of
> some automated merge algorithm.
> 
> This is a serious problem to associate contributors with code they did not write
> or review.

Maybe some mistakes had been made when solving the merging conflict. Let's fix it.

Just change

configs/starfive_visionfive2_defconfig

to

starfive/jh7110-starfive-visionfive-2-lite

I have sent a patch to fix it. Please check.

https://lore.kernel.org/all/20260214091424.28428-1-hal.feng@starfivetech.com/

Best regards,
Hal