[PATCH v7 1/1] board: zynqmp: add cmd for getting boot auth state

[Michal Simek]

On 1/12/26 11:02, Neal Frager wrote:
> Add command for checking if boot was authenticated.
> 
> Signed-off-by: Igor Opaniuk <igor.opaniuk at foundries.io>
> Signed-off-by: Neal Frager <neal.frager at amd.com>
> Reviewed-by: Tomas Melin <tomas.melin at vaisala.com>
> ---
> V1->V2:
> - extended zynqmp command with verify_auth sub-command
> - changed return value, so it can be used with scripts
> V2->V3:
> - separated status and ret values
> - replaced BIT(0) with ZYNQMP_CSU_STATUS_AUTHENTICATED
> - changed env variable name to "boot_auth"
> V3->V4:
> - removed unnecessary zynqmp_verify_auth function
> V4->V5:
> - added newline to zynqmp_mmio_read error msg
> V5->V6:
> - changed printf statements to debug
> - simplied status check in if statement
> V6->V7:
> - improved help message
> - removed unnecessary change to U_BOOT_CMD
> ---
>   arch/arm/mach-zynqmp/zynqmp.c | 32 ++++++++++++++++++++++++++++++++
>   1 file changed, 32 insertions(+)
> 
> diff --git a/arch/arm/mach-zynqmp/zynqmp.c b/arch/arm/mach-zynqmp/zynqmp.c
> index c0398a466ff..cea6f8f4a99 100644
> --- a/arch/arm/mach-zynqmp/zynqmp.c
> +++ b/arch/arm/mach-zynqmp/zynqmp.c
> @@ -362,6 +362,35 @@ static int do_zynqmp_reboot(struct cmd_tbl *cmdtp, int flag,
>   	return CMD_RET_SUCCESS;
>   }
>   
> +static int do_zynqmp_verify_auth(struct cmd_tbl *cmdtp, int flag,
> +				 int argc, char * const argv[])
> +{
> +	u32 status;
> +	int ret;
> +
> +	ret = zynqmp_mmio_read((ulong)&csu_base->status, &status);
> +	if (ret) {
> +		printf("Can't obtain boot auth state\n");
> +		return CMD_RET_FAILURE;
> +	}
> +
> +	if (status & ZYNQMP_CSU_STATUS_AUTHENTICATED) {
> +		debug("Boot is authenticated\n");
> +
> +		ret = env_set("boot_auth", "1");
> +		if (ret)
> +			return CMD_RET_FAILURE;
> +	} else {
> +		debug("Boot is not authenticated\n");
> +
> +		ret = env_set("boot_auth", "0");
> +		if (ret)
> +			return CMD_RET_FAILURE;
> +	}
> +
> +	return CMD_RET_SUCCESS;
> +}
> +
>   static struct cmd_tbl cmd_zynqmp_sub[] = {
>   	U_BOOT_CMD_MKENT(secure, 5, 0, do_zynqmp_verify_secure, "", ""),
>   	U_BOOT_CMD_MKENT(pmufw, 4, 0, do_zynqmp_pmufw, "", ""),
> @@ -371,6 +400,7 @@ static struct cmd_tbl cmd_zynqmp_sub[] = {
>   	U_BOOT_CMD_MKENT(rsa, 7, 0, do_zynqmp_rsa, "", ""),
>   	U_BOOT_CMD_MKENT(sha3, 5, 0, do_zynqmp_sha3, "", ""),
>   	U_BOOT_CMD_MKENT(reboot, 3, 0, do_zynqmp_reboot, "", ""),
> +	U_BOOT_CMD_MKENT(verify_auth, 2, 0, do_zynqmp_verify_auth, "", ""),
>   #ifdef CONFIG_DEFINE_TCM_OCM_MMAP
>   	U_BOOT_CMD_MKENT(tcminit, 3, 0, do_zynqmp_tcm_init, "", ""),
>   #endif
> @@ -446,6 +476,8 @@ U_BOOT_LONGHELP(zynqmp,
>   	"	48 bytes hash value into srcaddr\n"
>   	"	Optional key_addr can be specified for saving sha3 hash value\n"
>   	"	Note: srcaddr/srclen should not be 0\n"
> +	"zynqmp verify_auth - verifies if boot.bin was authenticated\n"
> +	"	Create boot_auth var : 0 not authenticated, 1 authenticated\n"
>   	);
>   
>   U_BOOT_CMD(

Applied.
M