[PATCH v2 01/10] sunxi: sun60i: initial support for A733 SoC

[Yixun Lan]

Hi Andre,

On 01:40 Fri 02 Jan     , Andre Przywara wrote:
> On Sun, 30 Nov 2025 21:45:10 +0000
> Yixun Lan <dlan at gentoo.org> wrote:
> 
> Hi Yixun,
> 
> thanks for updating this series, and sorry for the delay in the review.
> 
> As for this patch: it should go to the end of the series, since it
> already introduces the possibility to select the new SoC, even though
> the rest of the code isn't ready yet. And I think we should drop the 
> "select SUPPORT_SPL", since it's not really supported, without the DRAM
see my comment in other thread

> code. If we rely on FEL to load U-Boot anyway, we can much simpler load
> TF-A and U-Boot proper directly, no need for any FIT image.
I haven't went the way to lod TF-A, U-Boot separately even use FEL,
but insted, still follow previous traditionl way - combine all images
together, that's TF-A, SPL, U-Boot..

for this reason I'd just keep configurations of SUPPORT_SPL and FIT..

> And thanks for using the SUNXI_GEN_NCAT2 symbol, btw!
> 
> One small thing below...
> 
> > Add basic support for Allwinner A733 SoC.
> > 
> > - Include some basic register definitions
> > - Introduce a new SUN60I A733 Kconfig option
> > - Ssetup RVBAR register properly according to docs
> > - Config max DDR size 16GB
> > - Config SRAM 0x62000 for TF-A
> > 
> > Signed-off-by: Yixun Lan <dlan at gentoo.org>
> > 
..
> >  config SYS_BOARD
> >  	default "sunxi"
> > @@ -1186,6 +1199,7 @@ config SPL_STACK_R_ADDR
> >  	default 0x4fe00000 if MACH_SUN50I
> >  	default 0x4fe00000 if SUN50I_GEN_H6
> >  	default 0x4fe00000 if SUNXI_GEN_NCAT2
> > +	default 0x4fe00000 if MACH_SUN60I_A733
> 
> This is not needed, since the same address is already selected by NCAT2.
> 
will drop it

-- 
Yixun Lan (dlan)