[PATCH V2 0/2] power: regulator: pfuze100: Fix voltage calculation and support high-range

[Peng Fan]

On Sun, Jan 11, 2026 at 09:23:45AM +0100, Michael Trimarchi wrote:
>This series addresses two significant issues in the pfuze100 regulator driver
>regarding voltage calculation accuracy.
>
>The first patch fixes the handling of the "high range" bit. PFUZE chips support
>two voltage ranges (controlled by a register bit) with different step sizes
>and base voltages. Previously, the driver assumed the low range, leading to
>incorrect voltage settings on boards configured for the high range.
>
>The second patch corrects the interpretation of min_uV. The driver was
>incorrectly using the device tree's regulator-min-microvolt constraint as the
>mathematical base (zero-index) for voltage calculations. This caused offset
>errors whenever the DTS constraint differed from the hardware's absolute minimum.
>The patch introduces physical minimums in the driver descriptors to ensure
>calculations are based on the datasheet specifications, treating the DTS value
>strictly as a safety constraint.
>
>Together, these changes align the U-Boot driver logic with the Linux kernel
>implementation and ensure correct voltage output.
>
>Michael Trimarchi (2):
>  power: regulator: pfuze100: support high voltage range bit
>  power: regulator: pfuze100: Decouple hardware base voltage from DTS
>    constraints
>
Please do not submit three version in one day. That only shows patches
are not developed in good shape.

The changes looks good to me, but I would like to see which platforms
are tested with the patchset before apply.

Thanks,
Peng