[PATCH 1/5] arm: dts: k3-binman: Use configs for ATF/OPTEE addresses

[Neha Malcom Francis]

Hi Suhaas

On 12/01/26 15:06, Suhaas Joshi wrote:
> Instead of hard-coding ATF and OPTEE addresses in firewall configuration
> templates, use K3_*_LOAD_ADDR. Doing so ensures that if someone moves
> ATF/OPTEE regions, the change gets picked up by binman without
> explicitly having to modify dts files.
> 
> Signed-off-by: Suhaas Joshi <s-joshi at ti.com>
> ---
>  arch/arm/dts/k3-binman.dtsi | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/dts/k3-binman.dtsi b/arch/arm/dts/k3-binman.dtsi
> index 761b1730464..0fd93f9536a 100644
> --- a/arch/arm/dts/k3-binman.dtsi
> +++ b/arch/arm/dts/k3-binman.dtsi
> @@ -476,8 +476,8 @@
>  		permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
>  						FWPERM_SECURE_PRIV_RWCD |
>  						FWPERM_SECURE_USER_RWCD)>;
> -		start_address = <0x0 0x70000000>;
> -		end_address = <0x0 0x7001ffff>;
> +		start_address = <0x0 CONFIG_K3_ATF_LOAD_ADDR>;
> +		end_address = <0x0 (CONFIG_K3_ATF_LOAD_ADDR + 0x1ffff)>;
>  	};
>  	firewall_armv8_optee_fg: template-8 {
>  		control = <(FWCTRL_EN | FWCTRL_LOCK |
> @@ -485,8 +485,8 @@
>  		permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
>  						FWPERM_SECURE_PRIV_RWCD |
>  						FWPERM_SECURE_USER_RWCD)>;
> -		start_address = <0x0 0x9e800000>;
> -		end_address = <0x0 0x9fffffff>;
> +		start_address = <0x0 CONFIG_K3_OPTEE_LOAD_ADDR>;
> +		end_address = <0x0 (CONFIG_K3_OPTEE_LOAD_ADDR + 0x17fffff)>;
>  	};
>  
>  	ti_falcon_template: template-9 {

Reviewed-by: Neha Malcom Francis <n-francis at ti.com>

-- 
Thanking You
Neha Malcom Francis